fleebjeebOP•

Been absolutely loving these AirPod Pro 2nd gens! Finally replaced a pair of dead 2016 original AirPods, and the difference is astounding. Had to give them a custom setup!

3
geekgeek2019•

is that a skin?

2
newacc_opscraft256•

Probably a case. You can see that the lip of the charcoal carbon has some thickness to it. The tips are foam, dunno about where they got that color from, and I wish I could give you an answer to what that charm hanging from the side is…

2
geekgeek2019•

and I wish I could give you an answer to what that charm hanging from the side is…

okay lol I didn't notice that

2
fleebjeebOP•

Tips are from ADV sound, skin from Monocarbon, and 3D printed bead from Postmortem Plastics!

2
littlexsparkee•

How do you like the tips? The adaptor alone could be valueable since I have a ton of silicone tips from other headphones I might be able to fit on it

1
fleebjeebOP•

It is! (Dark) purple carbon fiber skin from a company called Monocarbon.

1
mcjasonb•

Is it a skin or a case?

1
fleebjeebOP•

It’s technically a very thin hard-shell case made from carbon fiber, just slips on with a tight fit. Would probably help for small drops, but I wouldn’t count on it saving anything in a significant impact.

1
hpx00•

are memory foam ear tips any good?

2
fleebjeebOP•

I’d say the general comfort level increased rather noticeably, especially when wearing for long periods of time. Active noise cancelation is the slightest bit diminished, but this is barely perceivable in my opinion!

2
hpx00•

Sounds very good tbh, where did you get yours from? Can i have a link?

1
fleebjeebOP•
1
hpx00•

ty!

1
Pickles569•

Love the lanyard you should make more and sell them

2
fleebjeebOP•

Much appreciated! I wish I could, however everything is really tightly tied into the lanyard holes! If you want to try yourself, this is what I did:

Fed a strand of 90 paracord through the AirPod lanyard holes, then formed a “two strand diamond knot” as a stopper. Cut off the excess and sealed with flame. (YouTube has easy to follow instructional videos for the knot!) The rest of the lanyard is standard 550 paracord wrapped tightly around the smaller 90 cord, then fed through a random two-hole plastic component I reused from a free lanyard. (You could use black heat shrink wrap instead)

Then it’s simply a diamond knot on either side of the bead, with the slack tightly worked out until everything is secure! Cut off excess cord and seal with flame.

1
Pickles569•

Thanks I think I will try but I don’t think I will have much luck

1
fleebjeebOP•

It might take a few practice knots to get things down, but I know you’ll get it! I can send you the exact YouTube short that was the most helpful if you’d like?

1
Pickles569•

If you can that would be most helpful

2
kingcolbe•

Memory foam?

1
fleebjeebOP•

Indeed! From ADV sound

1