Prodesk 600 G3 Mini Issues

Help me to: Hardware

Have a few of these and they're silent for the most part. One unit however has a high pitched hum caused by the fan being fully positioned. It's not terrible when lifted out of its spot but as soon as I lower it down over ram the whine comes on.

Not incredibly loud but enough to make me want to shut it off unless it's actively doing something. Does that sound like it might be some odd interaction or just a slightly busted fan?

On a side note anyone know how to get AMT to do anything on these? Enabling network access gives me access to the webui with some logs and power control. I'd like to get them set for SOL so I don't have to hookup a keyboard/monitor anytime I break something.

amtterm errors out when attempting and it appears the port SOL lives on isn't even open. Only the webui port on 16992 is open out of all the AMT ports.

Posted Feb 17, 2023, 10:41 AM UTC

63
lenaxia•

Buy a new fan. I have 5 g2 minis and two of them had bad fans even after Clea ing them out. A new fan can be had off eBay for $12.

How'd you enable AMT? Got a tutorial? Would love to AMT mine too.

3
nullmarkedOP•

Enable AMT in the BIOS if it's not on already. I mashed F9 for bootup menu, exit bootup menu for startup menu, select ME setup. Default password is admin, it will prompt you to enter a new password. Then activate network access and configure whatever options you like. You can access the webui via the ip on port 16992, eg http://192.168.1.101:16992

3
lenaxia•

Thanks! Will give it a try.

1
muthian•

I spent the better part of a week trying to figure out how to get this working like the AMT docs said it should and where to find the HP documentation. THANK YOU!

1
nullmarkedOP•

Glad i could be of help! Please post back if you get it do anything beyond the bare minimum of power control/logs via webui! Haven't done more than a cursory initial attempt, too many projects.

2
muthian•

Working on getting MeshCentral + MAAS installed and working with the machines so I can get rid of the KVM.

1