5800X3D stuck at 4450 Mhz after swapping cases + adding 4090

Tonight I rebuilt my PC in a Fractal North case. I also added a 4090 while doing so. Upon boot, my CPU is clocked like it's under load and has the temps to match, but it's not under load. The CPU is at less than 10% load, but the core clock is staying around 4450-4525 Mhz. I'm at a loss as to why.

The only changes are the case and the GPU. With the new case, I have four 140mm fans for intake and one 120mm for exhaust. There is no reason I can think of that should be causing this. Any suggestions?

Here's the data Afterburner is showing me: https://imgur.com/a/t6woetG

Posted Feb 26, 2023, 6:21 AM UTC

013
sspspaspam•

Maybe try reinstalling the AMD chipset drivers? It sounds like the power plan is somehow broken, and those drivers should recreate the power plan.

1
KhellendosOP•

Will do.

1
Antonis_32•
  1. Reinstall your AMD chipset drivers.
  2. Switch to the windows balanced power plan
  3. Test again
1
KhellendosOP•

I tried all of that without success. I also updated the bios, and it didn't change anything. The only thing that changed the max clock was when I turned off a bios boost setting about CPU boosting, but then the CPU was stuck at 3400 mhz and wouldn't go above it.

1
Antonis_32•

Just enable XMP and resizable bar, set pbo to auto, and test again.
Also in case you have ryzen master, reset it to default settings.

1
KhellendosOP•

I enabled and disabled every CPU option one by one (outside of manual overclocking which I don't do) in my bios, and only removing core performance boost changes the issue, but that completely disables all boost. Any other suggestions?

1
Antonis_32•

Besides a clean Windows install I can't think of anything else. Try posting on this forum here:
https://www.overclock.net/threads/5800x3d-owners.1798046/

1

7-10% cpu usage isnt exactly idle

whats using all that? sure windows isnt updating some program?

after everything starts in windows my cpu usage stays around 0-1%

find whats using that CPU and ull find the problem

1
KhellendosOP•

Razer Synapse for my mouse. I'm going to try a fresh windows installation. I'm out of other ideas. Even my memory isn't showing up at the right speed, despite xmp being on and it showing up right in the bios. So something fucky happened. Maybe an update that screwed me or something.

1
Mysteoa•

Try closing as much background program as you can see if the clock drops.

1
KhellendosOP•

It fixed itself when I reset windows. The last thing I installed was MSI's dumb app, which didn't show up on the CPU report. So that's what had to be the culprit

3