r/fixit•
hamcake

LG dishwasher leaking (LDF5545ST)

Hi there -

I have an LG dishwasher (LDF5545ST) that is leaking from the bottom. Anyone have experience with this model? I can't find any videos and very little for forum posts about this kind of issue. I was hoping there would be some obvious gasket to replace, or maybe the motor wouldn't be too expensive (but it's like $300).

LG has a flat rate for a repair, which is $270, so I may just go with that.

Any advice?

​

​

https://preview.redd.it/4cjnm6sqj3qa1.jpg?width=4080&format=pjpg&auto=webp&v=enabled&s=1e6654899ded3d0b0e6c8c61da13085061a2d789

​

https://preview.redd.it/e6grpmguk3qa1.jpg?width=3072&format=pjpg&auto=webp&v=enabled&s=c6923fbad8947ca66c6c094ca2c5c1bc5312f4bd

​

EDIT:

I opened up this pump housing (it twists and then comes apart like a clam shell). There's a bunch of crap in here that I'm cleaning out. I don't see any gasket between the two parts, which seems unusual.

I'm considering putting some silicone in here... or maybe trying to find a large enough o-ring to fit in here.

​

https://preview.redd.it/af1z6p9sx3qa1.jpg?width=4080&format=pjpg&auto=webp&v=enabled&s=26e874bb395a301c3224e0f5209abba8c49afcc9

Posted Mar 26, 2023, 2:56 PM UTC · edited

23
awooff•

Id find another on marketplace for cheap or free. An lg dishwasher will break often.

1
snarcasm68•

I’m impressed with what you have done so far. Once you have cleaned the gunk out, that looks like it might fix the issue. The large white disc looks like it should seal nicely when you put it back together.

1
hamcakeOP•

Thanks. I was getting desperate to fix this thing, and didn't want to spend hundreds of dollars.

For posterity, in case anyone else has this issue:

I opened up the pump casing, and cleaned out all the gunk. I used a scrub brush to get most of the gunk off, and then an alcohol wipe to clean the two halves of the plastic casing. I wanted a very clean surface between the two.

One half of the casing has a groove that the other half seats itself into, and they twist to lock together. To me, it didn't feel super tight, and I wasn't convinced that water wouldn't find its way through. It seemed like a place where you'd expect to find a gasket, so that feels like a mystery to me. I haven't been able to find a diagram of the inside of the pump casing...

I applied a thin bead of kitchen and bath silicone along one half, and then closed up the casing. I waited an hour for it to dry.

When I ran it, there was about a teaspoon of water that leaked, but I haven't checked where exactly.

Hopefully this holds up. If not, I may try to find a gasket.

Model #LDF5545ST/00 Official LG dishwasher

Pump Casing: ABT72989202

1
HoustonRamGuy•

How did it hold up?

I have an LG dishwasher leaking from the same place. I'm trying to get my local LG authorized service shop to replace the pump under the 10 year warranty for the motor my model has, however they are taking forever to get back to me. My wife wants to just junk it and buy a bosch, but I don't want to spend the money.

1
hamcakeOP•

It was running just now, so I checked underneath. I put a cookie sheet under there to catch anything, and I can see some dampness, but it would definitely evaporate between loads (I mean, clearly it has been).

When I called LG, they said "if" it was the part that was covered under warranty, then the part would be covered, and I'm pretty sure they said I'd still be on the hook for labour. They didn't give me an option to replace it myself. I don't remember if I'd asked for that...

If you are able to get the replacement pump, it would be pretty simple to replace it.

LG also gave me an option to pay like a $300 CAD flat fee for the fix, but when I tried to arrange that on the site they gave me (https://lgoutofwarranty.ca/en/main/home.do) the request wouldn't go through for some reason. That's when I said fuck it, and got to fixing it myself.

1