PoE -> 12V coax adaptor for antenna amplifier?
Hi all. I have an HDHR up and running off a PoE adaptor thanks to some previous threads here.
I'm trying out a new Televes antenna with an onboard amplifier that appears to take 12V over coax from its own AC adaptor. Since I've already got a PoE switch onsite with some excess capacity, I'm wondering if I can take 12V PoE and adapt it to 12V over coax for the antenna without running AC power. It seems like something like this could be adapted, assuming 12V-over-coax is standardized?
Posted Apr 2, 2023, 9:50 PM UTC
21
I have a televees antenna and it has a preamp built into the antenna . Inside after the coaxial comes in from the antenna I attached the televees included amplifier which has 2 signal outs. One is run directly to my tuner for my main tv and the other runs to my airtv2. I had an amplifier like the one in the picture before but didn’t use that when hooking up y current set up. Long story short and most importantly all the channels I receive have a significant increased quality, enough so that weather is no longer an issue for me. Just set up the antenna the way it shows in the directions and then see if you need to make adjustments