Question regarding Tamiya paints.

Posted Apr 8, 2023, 8:27 PM UTC

Posted Apr 8, 2023, 8:27 PM UTC
I recommend just soaking the minis in soapy water and trying to scrape off the paint with an old toothbrush. Also yes, you should almost always thin your paints if you want to avoid letting the details get drowned. Usually just making sure that your paintbrush is relatively wet and then scraping off any excess paint will get your paint to a nice consistency
I just thinned some brown and did their hair/any wood areas and there's a world of difference. Now I understand why the bottles are so small XD.
For your first try I would say it’s good.
My recommendation is to buy a good paint brush don’t cheap out on that. Once you have your base colours down you can use a wash to add detail easily. If you are going to use a wash you should use a lighter base coat colour.
Honestly, for first try, not bad! But you always wanna thin down your paints - layering is very good for minis and help add depth and capture detail. I know someone said soapy water to get some extra off - i believe soaking in diluted alcohol and scraping with a toothbrush can help too. If you’re looking to improve too, I highly recommend Mini Primetime with Will Friedle - it’s a short mini series and they’re available on youtube, and he teaches some basic tips and some cool tricks! It all takes practice though! Keep practicing! A lot of mini painting is also a trust the process deal, and even if you make a mistake, pretend it’s intentional in the million years someone notices it.
First step is determining what can be used to thin your paints. Tamiya typically is alcohol-based and can be easily thinned with alcohol thinners (tamiya sells a thinner that is perfect for this). Water in a pinch may work, but you will get better results with an alcohol thinner.
Once the paint is thinned, make sure it’s applied evenly where you want it to be and continue from there
Nice effort. If you can, I would maybe try switching to some Acrylics like Vallejo/Army painter, if you’re using oil/alcohol based paints. For a first time painter they’re a bit more forgiving. Nail polish remover will strip a mini in seconds if you’re not happy with them. You have to be careful though or you can melt your mini! They look ok to me, you’ll need some matt varnish as well to take the shine off. Welcome to the hobby, and definitely thin your paints. #twothincoats
Use a wet pallet
Can you tell it's my first time painting 😅