r/Amaro•
Benzofurry

Experiments with activated charcoal?

Advice Needed

I was curious if anyone had experimented with using activated charcoal to make their intial extraction smoother? For example you can pour vodka through activated charcoal to make it smoother. Would this help in the extraction stage to end up with a more smooth final product?

Posted Apr 28, 2023, 5:39 AM UTC

45
TransmutedHydrogen•

You'd brobably filter out a lot of the flavor, so technically it would be smoother

6
RookieRecurve•

If you are looking to take the sharp edges off, the best method I have found is bottle aging. Other options are using a better quality base spirit, add glycerin, or age on oak. You could even go so far as to clarify with milk.

As others mentioned, you will likely strip away too much flavor using carbon.

6
GovernorZipper•

Re: vodka and charcoal:

By the time you factor in the cost of the filter and time, it’s likely going to be better to just buy a higher quality vodka to start with.

4

I didn't, but a liquor maker said botanicals already absorb impurities. Ill add ,they get very masked underneath, anyway. Unless is too bad, of course. In that case, would the price difference worth it. Everclear is $28 a 1.75 bottle were i get it, a 100 0roof vodka about $25.

2
Staidly•

To me it’s more about making good cuts - charcoal won’t help with heads for instance.

I suggest using horticultural charcoal. It’s not quite as effective and doesn’t last forever perhaps but it does work and it might be more accessible and especially cheaper.

I haven’t tried filtering low wines but it’s certainly something to experiment with.

Edit: I thought this was one of the distilling subreddits, my bad.

I would absolutely try using charcoal, my concern is that it won’t remove some of the more volatile alcohols that give that sharp bite. Simmering alcohol very very very carefully at 120F with a bit of toasted and charred oak/apple/cherry/bourbon barrel chips for 30 min I think after charcoal filtering would be a better approach.

1