PC does no turn on after RAM swap + cleaning with compressed air, possible PSU fault?
EDIT: To add onto this, the MoBos RGB LED flashes green very briefly when I switch the PSU to from 0 to I (aka ON) when connected. If I remember correctly, that used to stay on before...
Hello y'all, I'm in need of your assistance and expertise, hope I filled this form out correctly, let me know if there's any additional info I can provide.
Any help is greatly appreciated, I've been at this for like 6h now and am at my wits end.
Current prime suspect is that the PSU died for some reason (compressed air or moving the PC outside to blow the dust out damaging it???)
**What is your parts list?
- Gigabyte Aorus Ultra X570
- RTX 3080 (PNY)
- 64GB (2x32) DDR4 Corsair Vengeance 3600MHz (CL18)
- *previous RAM was 4x8GB Corsair Vengeance 3200Mhz *
- AMD Ryzen 5900X
- beQuiet Dark Rock Pro 4
- beQuiet! Straight Power 11 750W
- various HDDs and SSDs (SATA and M.2)
- Fractal Design Define 7
Describe your problem. List any error messages and symptoms. Be descriptive.
I ordered some new RAM to swap to 64GB total and when installing it earlier today, figured I'd also renew the thermal paste and clean the hardware with compressed air.
After putting everything back together, it won't turn on anymore. No mater if I attempt to start the MoBo, CPU, RAM only outside the case or everything together, the following happens:
As soon as the PC receives the start signal, the PSU turns on briefly, clicks twice (as in 2 destinctive click noises from inside of it) and the fan stops (I assume it turns off at that point). If installed the GPU also turns off its fans at this point. On the MoBo the light for CPU flashes once as well.
Additionaly, I cannot turn the PC back on unless I remove the power cord and replug it back in after 5-10 seconds, possibly indicating the PSUs surge protector kicking in / shortening out?
List anything you've done in attempt to diagnose or fix the problem.
- Rebuilt the entire PC pretty much, took out MoBo, CPU/GPU and unplugged everything
- attempted starting the PC with CPU/RAM only outside of case
- Took out CPU twice and put it back in + cooler
- attempted using QFlash+ to flash a new BIOS (saw that on another post somewhere) --> PSU gives 1 click only as I press the Flash button
- put old RAM back in as I initially thought the new one was faulty.
- used 1 RAM stick at a time, one-by one
Provide any additional details you wish below.
I unfortunately do not have any spare parts outside of the old RAM sticks. I will likely go to a store and buy a new PSU just to try that as I at least currently believe that's the faulty part.
Posted May 5, 2023, 9:48 PM UTC · edited