r/buildapc•
Error_X

Can I replace Aio radiators fans eated for up to air pressure 2,9 with fans rated up to 2,6?

Build Upgrade

Title was meant to say rated not eated lol. I have an nzxt kraken z3 aio 240mm. I wanna upgrade that to RGB. I have the options:

  • Buy 3x 120mm lightwing pack with included argb hub for ~65€ (all my other fans are light wings as well as im quite happy with the price performance tbh) and replace the 2x fans on the radiator and the non rgb 120mm next to it (top mounted aio on a h7 flow, so 360mm space)

Only problem I see here is the air pressure rating of 2,9 vs 2,6 on the light wings

  • Or I could straight up buy liquid freezer II 360mm argb (~140€) and sell my other aio to make some cash back

Posted May 17, 2023, 11:55 PM UTC

110
yamabob76•

Could you clarify what the ratings or 2.6 and 2.9 are?

The amount of air a fan can move is measured in CFM, but those numbers aren't anywhere close to what the CFM ratings would be.

In any case, you can just pick up a 3x 120mm pack and they will do the job just fine. There might be a slight difference in your CPU temperature, but it will be negligible.

2
togaman5000•

OP said air pressure, so likely the measurements are in mmH20

2
Error_XOP•

Yes thank you. When I made the most it was very late and I forgot what the measurement unit was.

2
Error_XOP•

Its mmh20 as said by the other commentor. Sorry, it was late and I forgot what the measurement unit was called.

Air pressure is important so the fan can actually push the air trough the radiator. If it doesnt have enough pressure Im not sure it would work 100%.

2
yamabob76•

Gotcha, that makes sense.

You are looking at a very very small difference between the 2.6mmH20 and 2.9mmH20 fans. I fall back on my previous statement... there might be a slight difference in CPU temperatures, but it will be negligible.

I'm guessing you are referring to the z53 (i think that is the 240mm model). NZXT sells an RGB version or that same AIO (the white one) with the AER fans, and those fans are only rated at 1.35mmH20 at max RPM... just to give you some perspective on the difference between 2.6 and 2.9mmH20.

To add on that, if you have never adjusted your fan curves to optimize your temperatures then changing the fans and worrying about the CFM or mmH20 difference shouldn't even be a concern.

1
Error_XOP•

Yes, the z53. Sorry, It was a rough evening for me... Still, a 3x 120mm set is 65€. I think im gonna skip on changing the fans and go straight for a 360mm rgb aio the next time I upgrade. Ill just put a non rgb 120mm at the top (one of the 2 that came with my h7 flow) and have it back and front rgb only, until I upgrade my aio.

Thanks for the insight though.

2
yamabob76•

No worries,.. wasn't trying to point out a mistake but more so just verify the product so my comparison wasn't pointless.

A 360mm is king!

2
Dman1791•

If you can net money back getting the LF2, that's by far the best option. It's one of the best performing AIOs available.

1
Error_XOP•

Yea I know thats why I picked it. However my 240mm z53 would probably sell less than 75€ used, so it would barely cover half the cost. Not gain me money (if thats what you thought, it kind of sounded like it).

Also I feel like my current aio is doing more than enough (sub 80c in cinebench in multicore workload on a 5800x3D in a H510 case with only a 1x120mm back and 1x140mm top exhaust fans). Im switching to H7 Flow and Im gonna have 3x140mm front, 1x140mm back, 240mm rad+120mm top fan setup. Temps will be even a little better I bet (not the reason for my upgrade but nice side effect).

I think im gonna sit this upgrade out until I actually need it.

1
Dman1791•

Oh okay yeah no point in getting the new AIO if you're spending a bunch; I thought the NZXTs just had really good resale or something based on the wording. You could just get a pack of Arctic P12 ARGB fans; they'd be the exact same fans you'd get from the LF2 ARGB, and they'd probably be a fair bit cheaper than the Be Quiets.

For your original question though, pretty much any fan these days will be fine on anything but a super thick rad. Unless you're using something super wimpy like a Noctua A12 with the low noise adapter, it's just not likely to be an issue.

1