Riding a motorcycle from Los Angeles to Patagonia. BMW of Colombia made a hole in my engine and refused to admit it. Help appreciated
https://imgur.com/gallery/41QefD1
I left my 2012 BMW GSA at the shop for service after riding it all the way from Los Angeles to Bogotá, Colombia, spanning seven countries and covering thousands of kilometers.
After leaving BMW of Bogotá, I rode directly to Neiva, Colombia, where I parked the bike overnight. The next morning, I noticed oil on the ground and the entire lower left side of the engine covered in oil.
At that point, I visited a local motorcycle shop to have it inspected, and I was informed that during a valve check, the BMW of Bogotá technician had neglected to use a spacer and had inadvertently screwed the bolt into the engine, resulting in a hole in the casing.
However, the valve service is the only missing item from the final bill; everything else was completed. BMW of Bogotá claims that “no valve check was required as my valves were in good condition.”
Yesterday I was scrolling through my photos and discovered that by pure luck I snapped a picture of my bike on May 31 when I dropped off the Ohlins shock that was serviced in the US. On that day I’ve been told that everything I asked to be serviced was done and that only the shock needs to be put back in. 3 days later I picked the bike up from BMW and was repeatedly told that crash bars were never touched However, when I zoomed into a picture I took, the bolt is clearly unscrewed and ready to be forced into the casing
(Additionally, upon leaving the service center, I heard a loud bang and later discovered that my steering damper had been incorrectly installed, causing it to rub against the fender and break an adjustment knob.)
After communicating with BMW rep over WhatsApp and requesting a video surveillance of the area where my motorcycle was worked on, I’ve been ghosted. The only thing I got from them was a kind of “shit happens, move on” type, but entire trip to Patagonia is at the risk of being finished because of incompetence of BMW of Bogotá. Without the engine, my GS is a bunch of fancy scrap metal sitting in South America
I had to move the bike out of Colombia due to Temporary Import Permit (TIP) expiration and issues with renewing it, hence I rode it to Ecuador where it’s now parked at the MotoHell motorcycle shop in Quito. On the ride there, oil pressure light kept coming on and off with oil level being good. I suspect that a little aluminum piece that was pushed into the engine by the bolt could be affecting an oil pump or causing other issues (perhaps more mechanically gifted readers could comment on it?) Angel, MotoHell’s owner will drain the oil, inspect the motor and cut the filter to try and find a piece of metal that could be there
The question now is what to do with this information and a newly found proof that the crash bars were removed and the long bolt was skewed into the casing. (I wrote emails to BMW motorrad in Germany, US and Colombia. The only one that didn’t respond is Colombian. Two others said that they forwarded my message to BMW of Colombia)
I’m also considering hiring a lawyer after I discovered new photo evidence and know for fact that they broke my motor. Does anyone here know how law works in Colombia and if it’s worth pursuing that route?
PS: Here is the dealer that did the “work” in case anyone knows someone who works there and could help to untangle this mess: Autogermana
https://maps.app.goo.gl/VLfSoUyfHnUdLyDT7?g_st=ic
Also, here is my instagram where I can share and tag bmw with even more photos of the problems that bmw of Colombia caused: IG @andreinotes
https://www.instagram.com/andreinotes/?hl=en
Here are the photos of the damages:
https://imgur.com/gallery/41QefD1
Thank you for reading and offering your ideas on how to deal with this situation!
Posted Jun 14, 2023, 8:49 PM UTC · edited
Doesn't fix your issue with them but can a shop just drill and tap the block to fix it so you can get going?