20 Silverado Brake System Codes After Replacing Rear Calipers
Went to replace rear pads on a 20 Silverado and caliper pistons were seized after initiating service mode/retracting pistons with scan tool. Replaced calipers on both sides, calipers all bled normally except for the rear passenger side which kept pulling air during vacuum bleed. Replaced banjo bolt and both washers to eliminate a leak, still pulling air.
The pedal feels fine and the parking brake functions normally, I've cleared the codes and codes reappear when i first press on the brake pedal. The ESC light and CEL comes on along with cannot exceed 46 mph and other brake warnings. The codes are:
P25A2 - BRAKE SYSTEM CONTROL MODULE DTC
C05B0 - BRAKE CIRCUIT LEAK DETECTED
C05D2 - BRAKE MASTER CYLINDER PISTON EXCESSIVE TRAVEL
I'm aware GM has a couple TSB's out related to these codes that just involves a dealer updating the BSCM, and one TSB that just suggests disconnecting the battery as ive already done. I work at a shop where towing the truck to a GM dealer isnt a preferable option so im trying to rule out everything outside of the BSCM.
Posted Jun 28, 2023, 6:35 PM UTC