Kobra 2 leveling/ homing issue

Kobra 2 leveling/ homing issue

Posted Jul 3, 2023, 6:02 AM UTC

15
GcoBandz•

Make sure all the cables are plugged in & plugged in correctly, I had the same issue but I didn’t realize I didn’t plug in a little cable in the back

1
kookystah•

Have you recently moved your printer unit? I’ve got the same error when I was rearranging stuff and didn’t realize that the braided cables were hitting a wall ever so slightly. That seemed to have pushed the Y movements more forwards than usual causing an error and practically mushing my extruded tip into the hotbed.

1
kingzinxsOP•

i haven't moved it at all since i'd set it up where it has been printing now, i haven't had any issues with the prints i've done either (besides some stringing) if you're currently still having this issue and manage to sort it out can you reach out to me if possible?

1
kingzinxsOP•

UPDATE: i have apparently solved this issue, not quite sure what fixed it but i disconnected all externals cables and reconnected them all, took off the hot end cover and pushed those connectors in (not sure if they were loose but pushed them in slightly regardless), slightly tightened both belts and finally tightened the nuts on the x axis bracket on the screen side.

1

We have the same issue. Also with z_hight button. Is giving random errors. First probing works, but when it wants to meassure the first point it gives an error

1