Large grid issue

HELP

I'm building a mobile base ground skimmer last night both pistons worked but my setup did not allow for material to get transferred out of the drills so I've ground it all down to extract through the pistons. When trialing the piston movement before adding the drills only one of the two fully welded pistons show up. For context the mobile base is still attached via solid blocks to the main base. Going in the working piston I can see all other blocks from my base and cycle it I can also see them in the task bar. Going to the other piston though I cannot see the rest of the blocks nor does it cycle there are only a handful of blocks almost as if it's a separate grid I've ground it down twice and even placed it in a different spot and it still won't cycle or show up with the other blocks. Any advice or clue as to what's happening?

Posted Jul 16, 2023, 7:30 PM UTC

12
NecrosiseKlang Worshipper•

This is definitely caused by a grid separation. It may be a pain to figure out where it is exactly but once you do you could use merge blocks to fit everything back together or grind and rebuild. Had this happen to me while building a large ship, ground down a block in the middle and forgot that block was the only connection point there. My ship spilt in two halves.

1
MechiniteOPClang Worshipper•

I'm pretty sure I know how it happened and what areas to fix then as the two cryo chambers and o2h2 gen was also on the separate grid

1