Old-Detective6824•

Staking looks awful on the right

1
ColossusDropOP•

I never stopped to look at it before... But yea... This was a half-assed attempt for sure. I should probably put something else in that 9mm pistol.

1
Blowback9•

It probably won't go anywhere. The "gas" key in a blowback just keeps the bolt oriented straight. It's not under a lot of stress. Or you could take it to a gunsmith for a quick re-staking, whack them yourself, or pull out the bolts and red loctite them.

1
ColossusDropOP•

Thanks for the input. I'm just going to leave it alone for now. I planned on swapping out this bolt for something else anyway (for a folding setup)

1
DarkNova55•

I have no damn clue what you're trying to tell us.

1
ColossusDropOP•

That the missing bottom lug from the Aero EPC bolt poses an out of battery detonation risk that would not occur with a conventional bolt face.

1
Thats_my_cornbread•

Maybe it’s just late but I’m still not sure which is deficient and why?

1
ColossusDropOP•

See article written by reddit user.

He also has a companion video which demonstrates this phenomenon.

https://blowback9.wordpress.com/2022/10/12/oob-warning-blowback-bolt-face-design-to-avoid/

https://youtu.be/88fY0ZcaCtw

1
Thats_my_cornbread•

Watched the video. Very interesting

1
ZChaosFactor•
1
Low_Ad_4049•

Which one is aero?

1
ColossusDropOP•

The one on the left is Aero.

I bought it, just because it's a rare commodity and I wanted Aero parts.

But now that I'm staring it in the face, it makes me a little nervous.

1
Blowback9•

Happy to help where I can! It seems Aero has made quite a few sketchy decisions regarding their EPC-9 parts and design. It's too bad, because they had so much potential to make it a really quality AR9. At least they got the barrel feed cone right (after some very bad feedback from customers).

1
ColossusDropOP•

It doesn't make sense.. It almost seems like a conscious decision by them to use the worst components.

In my case, it didn't matter too much. I'll be using an Mbx barrel and some other exotic items in this build.

1
Blowback9•

I once asked about the parts choices/designs and the response was essentially "that's what everyone else was doing", so it seems that they copied someone else's homework instead of putting in the research to understand what's best. Who knows.

Does the MBX barrel have an improved feed cone? If not, just be aware that it may not feed HP or flat point ammo.

1
ColossusDropOP•

Honestly I have no idea what kind of profile the cone has. I probably should have asked Mbx before I ordered it... Because it was not cheap. I will follow up when I get home and take a look at the barrel.

It's an Mbx 10/16 pinned, pro series comp. I don't plan on using hollow points for this since it is a competion gun.

I'm going to be so disappointed if this setup doesn't work..otherwise I have to go into my match with my SBR since it is the only PCC I have on me that runs 100% reliable....and the other shooters with JP5s are going to give me some dirty looks.

1
Blowback9•

I once asked about the parts choices/designs and the response was essentially "that's what everyone else was doing", so it seems that they copied someone else's homework instead of putting in the research to understand what's best. Who knows.

Does the MBX barrel have an improved feed cone? If not, just be aware that it may not feed HP or flat point ammo.

1
catlinalx•

So what would be a better bolt to use in an EPC?

1
Blowback9•

I would go with one of these bolts.  They all have the same profile/design and I believe they're all made by the same OEM supplier, just branded differently.

1