ColossusDropOP•

U/Blowback9 sure enough, I checked the cone and it's not good.

I only planned on feeding this with Federal Syntech PCC.

Worst case scenario I could try adding the Taccom feed ramp and hope for the best.

1
Blowback9•

Don't get too worried about it just yet. I'd build it out and see how if functions. Everything may line up and work just fine. If not, you may be able to dremel yourself a feed ramp into the bottom of the cone that will do the trick. I just purchased a regular feed cone barrel and I'm planning on trying to do exactly that - make my own feed ramp at the base of the cone and see how well it works. More research is needed first, but I'm collecting data now.

Worst case, you can send it to Rudy at Macon Armory and he can machine a new feed cone for you.

1
CORY_AKA_3DARMS•

I've been using a dremel to match barrels to a macon barrel I have. I made a printed model of the macon feed cone if anyone wants it to reference.

1
Blowback9•

Can you provide the specs and the process you use? I'd like to figure out a process that's simple and repeatable to help out folks that don't/can't send out their barrel for Macon's treatment.

1
ak_snowbear•

what using hand tools? lol

1
Fantastic-Stock664•

Check out Brekke Arms. Lots of top competitors use their barrels

1
ColossusDropOP•

I did, and the comp extension / barrel looks exactly like an MBX pro comp. Pro comps in black nitride are hard to come by. Stainless is pretty much the only option I see available right now.

Funds permitting, I'll try again later and buy a taccom barrel and mate it to pro comp myself.

1
ZChaosFactor•

Eh the taccom stuff has been severly lacking lately. Especially in the accuracy dept.

I would test it and if its bad then I would send it to rudy at macon armory to remachine it or do something else like the feed ramp before replacing it completely.

1
PierreDolinsky•

This cone might be just fine if you don't shoot hollow points through it.

1
HotelLopsided4138•

My 10/16 taccom throws darts. The 5in was ammo picky but loved Federal America Eagle

1
ak_snowbear•

large feed "cones" are the simple, easy and lazy way to chamber 9mm PCC barrels.

1
Low_Ad_4049•

The tach-on barrel with the ramp in the top feed lip was picky with ammo!?!? I was going to get that barrel to use hollow points.. dose it not work like it's suppose too?

1