[Question] Airbrushing Imperial Guard

To go along with my new Imperial Guard army, I picked up a Harder and Steenbeck Infinity airbrush. I've heard it said several times that having an airbrush really speeds up the painting of high model count armies like the Imperial Guard, but I've been unable to find much in the way of tutorials on how to paint Guardsmen (but lots on painting their tanks). Has painted their Guard with an airbrush that can offer some advice? Maybe have some photos, or links to tutorials?

Posted Jan 19, 2013, 9:35 PM UTC

118
ED-209b•

I found the key to getting good results from airbrushing is not to expect too much too soon. Use it it compliment your normal painting, start by simply using it to basecoat (not undercoat) your guard green - or tan or whatever colour you'd normally start with.

It'll never serve as a replacement for a brush but the more you use it, the more things you'll find use for.. If that makes sense?

Do lots of tests before using it on your models too, and get used to thinning your paints with airbrush medium and water. You can't put normal GW acrylics straight through an airbrush without thinning. Aim for the consistency of milk.

Shoot us any specific questions you might have!

2
matchpointOP•

If you play guard, what color scheme did you go with? I've picked up some Vallejo model air paints to use in the brush, but will definitely need a wider color range that what I have now, have you compared using various paints through your airbrush?

1
yorii•

One thing you can do way too easy with an airbrush is Zenithal lightning, dark base coat from a low angle and hilighted basecoat from a high-above angle. Complement this with a simple oil wash (oil wash is better for just getting the deepest contours of recesses, it does not pool as easy) and you have a basecoat which gives you a great ground to work on.

If you want you can also put a gloss varnish before the oilwash to allow it to flow even easier.

1
matchpointOP•

Would a GW wash be considered an oil wash?

1
[deleted]•

No, as far as I know, GW washes are water-based, like the rest of the range.

An oil wash is made up of oil paint thinned with something like white spirit. There are some great YouTube videos on the subject of oil washes if you need more information.

EDIT: Here's an informative video on oil washes. http://schnauzerface.blogspot.com/2012/09/schnauzerfaceminis-quick-tip-2-oil.html

1
apalehorse•

I started using an airbrush about six months ago after I got angry that i could see brush strokes from painting an imperial fist rhino. I'm very happy that I airbrush but like ED says, it takes time getting used to. Getting the pressure, mixture right and knowing before hand the order you will paint the layers, parts is crucial. I recommend you pick whatever the most common color is for your guard and apply that first. So if they wear khaki colored uniforms, I'd paint that. Then you can build on that color on armored parts. Remember also that even great airbrush artists go back to a brush for fine detail, clean up, etc. If, for example, you want to paint eyes on your guard, you'll have an easier time making the pupil with a brush or a toothpick than an airbrush. I'd pick one model and finish it. Then you know step by step the process you use, the layering you'll do, the hard parts and the parts you can breeze through for the rest of he squad. Good luck, its fun.

2
matchpointOP•

Do you have any recommendation on paint?

1
apalehorse•

vallejo. i use gw paints for some things but vallejo is amazing.

2
matchpointOP•

I've been using the standard Vallejo acrylic paints and have been pleased, and I've picked up some model air ones to try out. Are you thinning the regular paints or using the model air?

1
Anagamous•

I thin both VMC and VAC with airbrush medium. You can use window cleaner, too. VAC can be used straight out of the pot, though.

1
velcona•

badger also came out with there minitaire paint line that is meant to be used for airbrushing right out of the bottle. Ive also only heard good things about Vallejo.

1
Goliath0nline•

Try youtube.

1
matchpointOP•

That was the first place I looked. I found lots of tutorials on how to paint guard tanks there, but never found a tutorial on painting guardsmen.

1
[deleted]•

I've picked up a lot of good tips from painting videos based on historical and other non-GW miniatures. The techniques used to paint a 1940s Sherman or Tiger can be great for a 40k Leman Russ.

Since guardsmen take a lot of their visual style from WWII era militaries, you might find some good information from these historical hobbyists.

1
itsacoyote•

Whoah, did you just pick up a $250+ airbrush for your first time? H&S airbrushes are definitely some very nice brushes, I'm sure you're really going to enjoy using it. Is this your very first airbrush you're using?

For infantry, airbrushes are slightly limited in use as to airbrushing a vehicle because of limited area to paint. It'll be really great for getting a solid basecoat color in and some zenithal lighting. If you are really good at control over your airbrush, you can get further detailed with shading and other bits with the airbrush, especially if you're using something as small as a .14mm needle. Because of that, you're probably not going to find a lot of airbrushing tutorials for infantry to the detail you want, but you can probably use the techniques and demonstrations used in space marines to apply to infantry. Have you checked out Buypainted's youtube channel? He's got a whole load of great videos showing him using airbrushes on a variety of figures. This was the only list I could find of his Imperial Guard vids - http://buypainted.com/index.php/category/uncategorized/imperial-guard/ If you also haven't heard of this guy, Les Bursley has some awesome vids as well.

1
matchpointOP•

Yes, it's my first airbrush. The H&S airbrush wasn't cheap, but I'd heard if you were going to get an airbrush it's best to just buy a good one once, instead of several cheap ones.

I've watched a couple of Buypainted's videos, they are pretty good. Les Bursley also has some great ones.

1
itsacoyote•

I guess there are mixed feelings on what to buy for your first airbrush. Personally it is good to buy a decent airbrush, which means at least starting in the $100 range. You can get a very good Badger Krome for around $120(?) and that is a great brush, even Les swears by it. Anything less you're likely buying off-brand and cheap stuff so you are definitely taking chances on quality there.

Only reason I'd suggest starting off that way is that you then don't have to feel too scared about playing with your airbrush. You have got to learn how to dissassemble and reassemble that thing and while it's not the most complex of mechanics to work with, it does have tiny pieces and parts that can easily break if you handle it the wrong way. The needle is also a delicate thing to handle, especially if you have that .14mm needle. There are countless stories where people have bent the tip of the needle which ruins it, but at least that's not the expensive part. Not to mention with a decent brush, you can go to town learning how to handle your airbrush and realize what works and what doesn't, afterwards you can upgrade to a great airbrush and use that for more detail work and then you can use the old one for large basecoat work or to toss in some dirty stuff (primer, varnish, etc) that might not work well with the new airbrush. With that, I went with an Iwata Eclipse that came with a .3mm needle so I can do wide sprays and over the holidays I picked up a Badger Krome that has a .2mm needle that does better details.

Either way, good luck with the airbrushing! I'm quite jealous you got an H&S!

2
matchpointOP•

I have to admit, you are correct about being reluctant to play with such a high priced airbrush. I don't know personally know anyone else who has an airbrush, so all the information on how to use and clean one comes from tutorials on youtube. In hindsight, I wish I had picked up a more common brand of airbrush, because H&S replacement parts are impossible to find anywhere locally. I'd have to special order parts if anything goes wrong.

The particular model I bought came with a .15mm and a .40mm needle and nozzle. I'll definitely be using the .40mm needle to start off with, and once I'm a bit more comfortable will try the .15mm.

1