HP Omen Desktop PC Boot Issues
I was asked to take a look at a PC for someone. The original symptom was that it would consistently crash (presumably a blue screen but there is no graphical output) when the GPU got going for a minute or two. It was mentioned that sometimes when it crashed it would beep, but they couldn't tell me the pattern of the beep.
After a recent bit of testing, it started giving me a beep code. It is specifically 3 long, 2 short, which according to the manual means there is a RAM init issue. I've tested the sticks individually and it's sporadic. There is no pattern. I've taken known good RAM from other systems and it won't boot in this machine, except sometimes it does. I've taken the original RAM and played around with the slots and it may boot with a single stick, but then if I add another stick it won't boot. Take the "bad" stick out and now the orignal stick that would boot will no longer boot.
Each time I've tested, I have made sure that I am seating the RAM all the way in the slot. I'm now at the point where no matter which of the 6 RAM sticks I use (4 original and 2 known-good test sticks) in which slot it will not boot. It simply gives me the 3 long, 2 short beep code. If I use any of the 6 sticks in the other computer that the 2 known-good sticks came from, they work fine.
Anyone got any ideas?
Posted Oct 17, 2023, 6:30 PM UTC