Dig Octa running WLED 0.14 unable to use LED 6 or 8. Error "pins... can't be used"
I have a brand new Dig-Octa that I just plugged in and set the Ethernet type to "Dig-Octa" and installed WLED 0.14 from the QuinLED website (https://install.quinled.info/dig-octa/download.php).
After WLED 0.14 was installed I verified that Ethernet was still set to "Dig-Octa", and it was.
When I go to: Settings > LED Preferences - I notice channels 6 and 8 are not set:
Using the pinout guide for the Dig-Octa:
Source: https://quinled.info/quinled-dig-octa-brainboard-32-8l-pinout-guide/
It says I should be using GPIO 5 for channel (LED6) and GPIO 13 for channel (LED8), however when I set those settings and click on save I get an error that says:
"Sorry, pins [6,7,8,9,10,11,24,28,29,30,31,37,38,21,19,22,25,26,27,23,18,17,32,13,34,33] can't be used."
What can I do to resolve this issue or is this a bug in WLED 0.14 or the firmware from QuinLED?
Thanks!
Posted Nov 1, 2023, 11:24 PM UTC
Is pin 13 already in use, e.g. for button/IR/relay GPIOs?
From what I can tell that doesn't appear to be the case.
https://preview.redd.it/w01tugj5xtxb1.png?width=594&format=png&auto=webp&s=48e086730cbb1269eb9d62748a3b8431daa42358
Maybe check Config -> Usermods as well.
Or try 0.13.x.
I'm just guessing. I've not used a Dig-Octa before.