Hello Folks,
Just looking for some advice on where to go from here?
I just completed a 7800x3d build and copied some ram timings from Actual Overclocking Tuber, though my latency is ~10ns higher compared to some folks calming they did the same thing.
What can I tighten up here to improve the situation?
Posted Nov 12, 2023, 10:09 PM UTC
tighten secondary to 36 etc trefi 65535 trfc if u have a die ram u can get 120ns
Adjusting the following reduced latencies by 1.1 ns.
tRCDWR: 36
tRCDRD: 36
tRP: 36
tRAS: 28
tras doesnt go lower others should be fine at 36
put tcl 28 too
I just set it to 28, and tREFI to 65535, and I got a worse latency, but maybe some background process spiked or something?
66.2 now.
A second run is up to 68.9
Similar for a third run.
C:\Users\gaidd\OneDrive\Desktop\2023-11-12 15_11_50-ZenTimings 1.2.9.png
depends how bloat is ur windows check what die is ur ram to lower trfc and trrds x4=tfaw so urs 4 and 16
Alright, down to 62.3, from 70.7
Any other suggestions, or is that about it?
Should be able to get around 52-54ns depending on the kit. Mine is around the 52ns range
Just dont forget to stress test it
You are running AIDA in hypervisor mode. Turn off Core Isolation in Windows.
It appears to be off.
Memory Integrity: Off
Microsoft Vulnerable Driver Blocklist: On