kw_walker•

Magnets + baking sheets/pans.

25
Fivepygmygoats•

As others have said magnetic storage is key for MCP. This tutorial walks you through everything.

https://youtu.be/eKg8oPF4xfk?si=n3YQwvcu560JgcVQ

8
EMD_2•

Literally 4/5 of the people in my MCP group use this solution.

1
TwinxReaper•

MCP is what transitioned me from foam to a magnet storage. This is the best option and it’s incredibly easy. We bought two cupcake carriers, lined them with magnet sheets, and then magnetized the bottom of each miniature.

There’s a couple minis that need extra care with magnets because of wonky uneven bases, and the taller minis can be a logistical challenge… but those are few compared to the majority of delicate MCP minis that I no longer worry about transporting.

3
Goodman_Grey•

I do an alternate version of this. I use cheap galvanized steel roll flashing that I cut to shape and then double sided gorilla tape.

1
theWolfandOwl•

Magnets. Most of my mcp was fine being transported upright in foam cutouts but getting into Shatterpoint with all the lightsabers sticking out everywhere made magnets a necessity and they’ve been good for mcp as well

7
RogueHussar•

You really don't need baking sheets for magnetized minis. "DiYMAG flexible adhesive sheets" can turn your MCP core box (or any container) into a magnetic carrying case in 15 minutes or less. They're thin enough to cut with regular scissors and require no glue. They're also very cheap.

6

For most people, they already have baking sheets sitting around and 0 minutes is quicker than 15 minutes, you just need the magnets on the minis. I'm definitely not the first to start that way then eventually make a covered box.

1
Agntk91•

Magnets on the bottom and put them in a tin

4
Kenden84•

Magnets, cheap solution is a baking sheet with magnets on bottom of models bases. Expensive and much more safe is a proper magnetic storage case. see A case or Magna Racks. A inbetween with more effort is making your own.

You could for example buy a suitable box and glue metallic sheets to the bottom and top or similar and you get a pretty good case for low cost. A shoebox is a allright choice for smaller collections. Another option is to buy a toolbox, they tend to have metallic bottom sections in most toolboxes and they are ready to use with no extra work. They can be kinda expensive though and tend to be a bit on the heavier side.

3
[deleted]•

[removed]

1
THOADIN•

magnets and aluminium lunch box

3
booty-scooty•

Magnets + Costco cookie tin!

3
theokaybambi•

Very carefully

2
iWARGAME•

Here's a link to an older tutorial but the main principles remain the same. I hope it helps you transition into magnet land!

https://iwargame.wordpress.com/2017/10/30/tutorial-custom-magnetic-miniature-case/

2
kitsumodels•

I thought they were on a bed of sand

1
MacDaddyMacaroni•

If you want to buy things over making something things like mechi troop cases are pretty good

1