Bridge/Hub to Control Multiple Devices over BT/Wi-Fi/IR
My endless quest for an all-in-one device control solution marches on!
All my devices are in a server rack in the basement. Right now my content is a mix of Fire TV Cube (3rd gen), and Xfinity cable box and a HTPC. Video is distributed through an HDBaseT matrix and I also have additional ethernet runs to each room location.
I've tried Sofabaton, but it doesn't work for my needs (its not Wi-Fi, but either BT or RF and allows for a max of 30 ft).
I can use USB-over-Ethernet baluns to control the FireTV or HTPC, but it won't work for the cable box, for example. I would also quickly run out of ethernet runs if I had completely separate runs for each type of device (if that makes sense).
Is there any sort of hub that can take any signal input - be it IR, BT, whatever - and then transmit that a decent distance to my server rack?
Posted Nov 26, 2023, 6:53 PM UTC
I can pretty much guarantee you that any control setup capable of doing this would be several times more expensive than just sticking a Fire stick in every room of this house.
Having all the equipment in a central rack and distributing video to multiple rooms in the house is something that is done in multimillion dollar homes. And controlled via Control4 or Crestron systems.
This is not at all the same thing as just having a single equipment rack for a single home theater.
I'm basically trying to do as much DIY without going full control4 haha! At least I've been wiring the whole house for ethernet and can do just about everything, but having one central control remote/panel/etc has been the one piece thats been elusive.
Gets very complicated and time consuming but you could do a combination of Home Assistance + Global Cache IP to IR + BT adapters
https://www.home-assistant.io/integrations/itach/
https://www.amazon.com/Global-Cache-IP2IR-iTach-Wired/dp/B003BFTKUC
Then you could do a BT Proxy to extend BT connectivity to where you need it https://www.creatingsmarthome.com/index.php/2023/03/27/guide-bluetooth-proxy-to-home-assistant-using-esphome/
that's about as DIY as you'll find but man it's a lot of work and I gave up on it because it was more than I wanted to dedicate time to.