Eero Pro 6 with MoCA
Hi everyone,
I’m curious if my topology is correct as 1 of my leaf Eeros keeps pushing really slow WiFi speeds. It’s also not always the same Eero leaf that’s being slow.
ONT connects to Gateway Pro 6 with Ethernet.
Gateway Pro 6 connects to a MoCA adapter.
MoCA adapter goes to splitter.
Splitter goes to 2 other MoCA adapters.
Each of those 2 MoCA adapters are connected to their respective Eero Pro 6 leaf.
Thanks.
Posted Dec 2, 2023, 1:36 PM UTC
18
Are you using a moca compatible splitter rated 5 to 1675Mhz?
Are you using the input port of the splitter from the 1st moca adapter?
Have you tested the speed at the moca Ethernet port with a PC?
I would try all of these suggestions. I have 4x Eero Pro 6 all connected using MOCA, but only have One splitter. I have no speed issues at my home. Also confirm you are using higher quality Ethernet cables as well.
Thanks for the reply. On the connected devices section of the leaf nodes in your Eero app, does it show that each Eero is connected to all the other Eeros?
On the details for each eero, the app shows connection is wired. Prior to using MoCA / Ethernet backhaul, this showed wireless
Yeah, makes sense. Mine shows wired as well for all the Eeros, but under Connected Devices, it shows that it’s connected to all the other Eeros instead of just the Gateway. Is that the case for you as well?
Hi.
I’m using this splitter (looks to be rated for those frequencies): HOLLAND ELECTRONICS 3-Way Balanced Splitter MOCA Compliant 5-1675MHz https://a.co/d/0o7STdr
The gateway was connected on the input side. I changed this and have rebooted everything.
Yeah, I get the full 500 down/500 up when hardwiring into the Eeros.