Source
r/maschine•
fleximer

Connecting behringer TD3 to Maschine MK3 no sound

Question about operation

I have a TD3 connected via midi in and out to my maschine mk3, as well as an instrument cable from the audio out to the line in of the mk3. if i plug headphones into the TD3 i can hear the bass lines being triggered and synced with the MK3, and the MK3 play and stop buttons are also controlling it. however i get no sound outside the headphones and cannot record anything in.

I’ve tried making the input and outputs both MIDI, both Audio, one of each, all combinations. How do I get the synth to just play through the MK3 as if its an audio interface, and also have it synced to the clock?

I’ve been at this for 170 days. any and all help is appreciated.

Posted Dec 12, 2023, 5:29 PM UTC

14
KnottyDuckMASCHINIST•

Is the interface setup as your computers audio device?

1
fleximerOPnewMaschineMember•

no the MK3 is. the rest of the track is playing out loud, just not the input of the synth.

1
KnottyDuckMASCHINIST•

You have master level, group level, and sound level. In the sound level, on the pad you want to hear audio from, is this one pad set to receive audio?

1
KFBR392GoForGrubesMK3•

You should just run the audio cables out from the synth to the inputs on the maschine. Crank up the gain on the knob next to the inputs on the maschine. Then click this button to go into recording mode. At the bottom turn monitoring on, and that's all that should be needed. I have no idea what settings you've messed with that may not work with this though.

1