rednuck•

This is better then the 4x4 incident, if he parks like this over a storm drain he has a free catch can!

73
zzorga•

The hippie in me just cringed.

89
rednuck•

I would like to think nobody would actually do that, but sadly someone probably would

29
getsome13•

Im sure it already has been done....works equally as well for coolant flushes.

26
wintremuteOh, that? It's nothing. Ignore it.•

I have witnessed this with antifreeze. Two wheels on the sidewalk and the spout over the drain. It sweetens the catfish.

29
blatheringDolt•

It's not the right thing to do. But if you think about it, how many gallons are lost due to leaking engines on the ground each day? It must be in the tens of thousands of gallons across the US, let alone the world.

13
KennyMcCormick315I own all my project cars :P•

I kinda wish oil leaks were something that HAD to be fixed to re-register. They're a hazard to motorcycles and they cost a fortune. I keep my shit oil leak free, it isn't hard or expensive.

11
DeadZeplin"Hey, I just get the tools dirty, man"•

But why make it worse then... No way to justify it man, any shop will gladly take it for free, as they can burn it in their heaters, or sell it to a recycler

1
SuperStepside95 silverado 6.0 turbo project•

I went to an automotive school in PA. At our apartments I watched one of our classmates park over a storm drain and change his oil. He was from the backwoods of Maine where hes probably used to dumping oil on the ground.

3
Gnarlet•

I mean the oil came from the ground originally right? He's just sending it home.

3
TheCrudManShade Tree•

You could maybe stick your pan in the storm drain and not have to deal with knocking into it and it being in the way...

1
KennyMcCormick315I own all my project cars :P•

I would....if I didn't like the town I was in. If I liked the town I wouldn't, though.

-4
[deleted]•

[deleted]

3
rednuck•

There was a picture of a car on this subreddit earlier being propped up with a 4x4 piece of wood.

1
[deleted]•

[deleted]

2
ZosaCloud•

I've done this some years ago, but with a curved curb. Nothing wrong with it.

17
[deleted]•

[deleted]

1
Budpets•

First gear + handbrake, not a problem. This is about as dangerous as getting something out of your boot when parked on a hill.

1
camerajack21•

You're better off parking the two wheels from one side on the curb, rather than simply the front or the back. Handbrake on and car in gear and the chances of it coming off the curb are probably lower than when using stands.

12
beepee123OP•

I had to move quickly, the hotel manager kept coming out and yelling at us. It was a good weekend.

24
The_Schwenk•

"HEY YOU KIDS, GET OFF OF MY DAMN CURB"

22
Ihaveastupidcat•

I can imagine the guts it would take to do this. People hate when you work on your car in public.

8
AldenM1985 Volvo 744TI 1991 945TI 1983 242TI Homologation•

That was an awesome weekend!

2
getsome13•

Sure if the oil drain is one one side or the other of the pan. Otherwise you would leave a bunch of oil in the pan.

5
camerajack21•

Or you could just park the right way around so the plug was on the downhill side?

0
getsome13•

Correct if the drain is on the side. It it is on the back then putting the car at an angle would leave oil in pam

5
beepee123OP•

Drain is near the back, this was a pretty good angle to get the most drainage.

4
camerajack21•

Fair enough, I was simply stating that it would be safer to do it sideways than end-on, if you're worried about the handbrake failing.

0
boondoggie42•

mmm... B230FT.

12
beepee123OP•

B230F + Holset, megasquirt, and a bunch of other BS.

Edit: since I made it to the front, gotta show off my shit. Imgur

25
boondoggie42•

you. I like you.

13
Kevinmeowertons•

I just like the fact he said "megasquirt"

7
[deleted]•

[deleted]

10
beepee123OP•

Oh, it spooled. Eventually.

..I keep spare headgaskets.

24
Kevinmeowertons•

That laugh was amazing

17
[deleted]•

[deleted]

6
UniverseOfDiscourse•

Oh man, that was gold.

3
sp00nixVolvo 242DL, 745, 850T5, •

I seem to be already subscribed to you haha. Hello fellow Turbo Volvo owner.

2
Ihaveastupidcat•

OK I must know, how does that drive? Is it crazy fast? I would love to blow people out of the water in a family sedan. What a cool sleeper.

2
beepee123OP•

It was fast until I bent the subframe clutch-kicking my way around town. Heeeeeeeeeeya race clutch! Currently on cinderblocks in my driveway waiting for a warm day.

7
gigidy5Shade Tree•

Should have gone with the KKK
;)

1
blooregard325iASE Certified•

How easy was the MS setup? I've been wanting to do that for a 240/BMW E30, but never want to have it laid up for months. :D

1
beepee123OP•

Just don't bite off more than you can chew. I made a PnP harness from some old ECUs. It is easy, and has been very reliable. I have a K-jet 240, a late 90s chevy malibu, and the megasquirt car starts more reliably than either of the other cars.

I have a full harness replacement waiting but the PnP kit I made has been great so no real motivation to replace it yet.

1
blooregard325iASE Certified•

Believe me, this would be simple to re-wire, I've just read a lot of horror stories. ;) I've always like the idea of MS, I hope to work on it when I get back to the states. Thanks!

2
AshamedGorillaHome Mechanic•

There's something about Volvo people. They're... entertaining. If I had to choose one group of gear heads to party with for the rest of my life, it would be the Volvo crowd.

Full disclosure: I'm a BMW guy.

1
[deleted]•

This is fucking logical.

6
climbtree•

I'm kicking myself.

I needed to change my oil and we don't have a driveway, so I went to a parking lot with a bunch of planks and built a ramp in the middle. This would've been so much easier and safer had I thought of it.

2
carputt•

What does the post-headgasket have to do with anything?

5
sledp•

Headgasket breaks and allows the coolant and oil to mix. Gotta change both before starting the engine again. Oil with water in it doesn't work.

I suppose you could put off the coolant for a little while, but not the oil.

8
carputt•

That still doesn't explain the title to me. Did he just replace the headgasket? And now he's changing the oil? Or is he neglecting to change the headgasket?

4
beepee123OP•

The headgasket blew the night before, I changed it that AM (with the oil), then changed it again after a short drive (pictured) to make sure all the gravy was out.

6
carputt•

Thank you.

4
[deleted]•

[deleted]

1
[deleted]•

Not sure if you have awesome mechanic skills or the headgasket on your car is just super easy to change.

1
[deleted]•

[deleted]

-18
shitterplug•

I miss my old Ford Fairmont. Kick the oil catch pan under the engine, pop the hood, reach down and loosen the plug with a wrench. Stand and smoke a cigarette while it drains.

4
Gen_Buck_Turgidson•

HeebSpeed/TurboBricks meet?

3
beepee123OP•

TurboBricks Southeast 2011 I think.

7
gigidy5Shade Tree•

SE8?

2
beepee123OP•

Or maybe it was 9. Actually pretty sure it was 9. They kinda blur together. There was a dyno.

2
AldenM1985 Volvo 744TI 1991 945TI 1983 242TI Homologation•

SE 10. I know that I was there

3
gigidy5Shade Tree•

I stopped owning a Volvo before I ended up going to one of those
Is it still just a bunch of guys standing around consuming alcohol? lol

2
AldenM1985 Volvo 744TI 1991 945TI 1983 242TI Homologation•

I like that you knew this from a volvo being on a curb having the oil changed

2
Gen_Buck_Turgidson•

Not a turbobrick'r myself but i am friends with a few of them in Alabama. It just fits with their modus operandi. :)

2
FelverFelv•

Holy shit who is that guy? He's got a '91 volvo 740se! Those had super rare Volvo r sport body kit and were all loaded turbos. I know because I own the only one I've ever seen in person is mine!

3
AldenM1985 Volvo 744TI 1991 945TI 1983 242TI Homologation•

That's the OP

3
FelverFelv•

Lol I figured that out right after I posted I was just all caught up in the moment!

2
AldenM1985 Volvo 744TI 1991 945TI 1983 242TI Homologation•

What color is your SE?

2
FelverFelv•

601 red with all black interior. I think all the 91se's only came in red, white, black, and silver possibly. There were some '90 models that had the SE kit but only the 91s were actually badged "740 SE"

2
greasytshirtfingernails permanently dirty•

I used to work on tanks.

The old guys told me that they'd park the old M60A3's over a ditch, dump the 17 gallons of oil on the ground, refill and drive away. The Army doesn't accept that any more, thankfuly.

3
[deleted]•

Better than my plastic ramps that slide when you try to drive up on them.

2
RangerSixHey Guys, Watch This!•

...I hope he at least had the good sense to chock his rear wheels.

(Doubtful, but.)

1†
secretchimpmy engine actually looks like this•

The car isn't going to go anywhere.

10
RangerSixHey Guys, Watch This!•

Murphy's Law, my friend.

10
beepee123OP•

Fortunately, this was when the parking brake still worked.

10
RangerSixHey Guys, Watch This!•

I'd still chock the rear wheels, myself. Belt and suspenders, din'tchaknow.

11
Cheese_Bits•

Belts and suspenders don't work together. One pulls up the other hold steady, its wasted effort.

-8
RangerSixHey Guys, Watch This!•

...

"Belt and suspenders" is a colloquialism for "having a backup"; if the belt breaks, the suspenders keep the pants up (and vice versa).

10
yellowbal•

If the parking brake was on and the transmission was in gear or in park, it would be solid, no?

2
RangerSixHey Guys, Watch This!•

Not necessarily. Remember, Murphy's Law applies double to DIY auto repair.

6
incongruity•

Moreover, the risks of not vs. the cost of taking a moment to chock the wheels seems like a no-brainer to me (mainly because I'd want to keep what little brain I have, vs being run over in some freak accident!)

3
RangerSixHey Guys, Watch This!•

Indeed.

1
Obsolite_Processor•

Well sure. Unless the parking pall broke, or it got bumped into neutral, or a U-joint breaks, all sorts of stupid possible failures, and it changes between cars. For example, Putting a stick shift in gear will usually hold it still on a hill. Try it with a rotary engine, and the car will roll down the hill from low static compression. It would also happen on a piston engine with low compression.

If you can chock it, you remove all those points of failure.

When I have over a ton of metal suspended over my head, I like a lot of safety backup.

4
The_AntiPirateHeavy Equipment, torque'in a million lug nuts•

I always love seeing this. When I was a kid, our garage had a lip on it when you were pulling in to it, probably 3-4" high that you had to drive over. One of the first things my dad taught me about working on cars was that you could pull it up on the lip of the garage, or a curb, to change the oil or get underneath easier.

1
KMFDM781•

I've done stuff like this... When you own an '80s-90's turbo Mopar you get used to parking lot repairs. Axle change on the side of the highway was fun....steering column change in the dark in a parking lot....transmission at the drag strip was great but we had help that time..

1
nikniuq•

Ah, the old volvo in its natural habitat - being fixed on the side of the road.

At least you can generally fix them with a hammer and some wire. I miss my brick.

1
CayShue•

Now I know your reddit account.

1
beepee123OP•

Now I know you are a cheap, zip-tied, junkyard slut.

3
SBtransposon•

so you changed the head gasket on the spot as well?

1
beepee123OP•

Headgasket change was a few hours prior in a gravel parking lot. Had plenty of help. An individual much wiser than I suggested leaving both manifolds on, taking out the head bolts, and using a floor jack and a 2x4 to push up the intake manifold so the head opened up Pac-Man style. It was beautiful and worked a treat. A bit hard to scrape the old gasket that way, but with enough beer anything is possible.

3
toastyfries2•

I changed the head gasket on my Jeep CJ7 in a hotel parking lot in Virginia when it blew as I started my journey cross country. I eventually made it!

1
302HOsmall block or bust•

I had a driveway/front yard with the perfect little dip that acted the same way. Get two wheels on the grass, 2 in the driveway, block the wheels and slide the catch pan underneath.

If this particular 3100 didn't have an oil filter accessible from the top I would have been out of luck.

1
harribert•

So how are them torque rods treatin' ya, Mr. Beeps?

1