Installed new GPU, getting "New CPU detected" message on boot

Open | Hardware

So I installed a new GPU and am now getting the message "New CPU detected. Press F1 to enter setup" everytime I boot the PC.

Not a typo, I switched the Graphics Card and now it's telling me it detected a new processor???

Then I can only press F1 to enter the BIOS and from there have to manually select a Boot drive to enter windows. If I simply exit / save & exit the BIOS it will reboot and the same message appears.

It also saves any settings I make in the BIOS properly, date and time are correct etc.

I looked up the error already and tried the following steps:

  • Flashed BIOS to the latest one & reset CMOS
  • CMOS reset separately
  • changed the battery on the motherboard to a new one
  • put the old GPU back in
  • took out RAM and re-seated it
  • double checked all the cables
  • enabled "ignore F1 message" in BIOS, this leads to the PC continuously rebooting everytime as it errors out and never boots into Windows

None of these steps resolved the issue.

I also don't understand the error to begin with as it's not relevant to the actual hardware swap I made.

The PC itself works fine, no issues besides this one.

Hardware:

  • Asus B-550A Gaming
  • RTX 4080 Super (Gigabyte Gaming)
  • (previously RTX 3080)*
  • Ryzen 5900X
  • 64GB DDR4 RAM, Corsair Vengeance.

Posted Feb 7, 2024, 3:10 PM UTC

10

Comments aren't archived yet

Comments for this period haven't been loaded into the archive yet.