Want to get my first 18650 light, almost done, T6-3C vs. U2-1B?

I have a couple of nice lights, but all are eneloop powered (fenix ld-22, trunite Ti, oLight i3 eos) I'm about to buy a considerably brighter light, but I can't find any proper info about the differences between the T6-3C and the U2-1B emitter. Both options are available for the light I want to buy. Will one be brighter, warmer, more consistent, or "better" than the other?

Posted Apr 12, 2013, 11:51 AM UTC

26
hautepocket•

There's also a new version of the XM-L called the XM-L2, which is supposed to be 20% brighter than the U2. I've seen it on the Olight M22 and M3X, and they are noticeably brighter than their predecessors.

3
neuromonkey•

Thanks. I find it hard to keep up, sometimes.

1
citruspers•

Assuming you're talking about XM-L emitters, the U2 is the successor of the T6 binning, ramping the max output from 1000 to 1200 lumens, and being more efficient than it's predecessor (IIRC).

2
ObsessionAddictOP•

Thanks for that, I am indeed talking about XM-L transmitters. So the tint of both should be the same? What would be the place to go if I want to research some more on this myself? Thanks for pointing that out, based on that info, I found this wiki and finally understood the tint story I read somewhere else.

Based on this image I understand that the 3c is a good deal "warmer" than the 1b, which seems to be a wee bit blue-purple-ish. (I'm sitting behind a somewhat bleak monitor btw, color-wise, so I'm not 100% sure)

1
citruspers•

Well from the chart you linked the binnings have different color temperatures/tints, and indeed you read correctly, the 3c variant is warmer than the 1B.

The thing is, our eyes are very good at adjusting to different color temperatures. Your average incandescent home bulb, for instance, is roughly 3000 Kelvin, whereas your average clear sky daylight temperature is 5600 (same as xenon camera flash). And yet once you are only looking at one color temperature, our brain adjusts and makes it look white to us.

And don't forget that a warmer powerLED is less efficient than a cooler one due to more fosfor being applied to the emitter.

Oh, and for finding information: http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/XLampXML.pdf

Just google CREE + model number and type and the datasheets should be the first result.

2
[deleted]•

[deleted]

1