Gigabyte microcode update information

It's horrid?

Gigabyte Z790 Aorus Elite X wifi7 with a 14700k on Air cooling.

Stock Intel performance from fresh flash has it pulling 250W PL1 and PL2, 5MHz reported actual max despite it showing as 5.5 available. Cinebench R23 was about 31k with it thermal throttling across a couple of cores within a minute or two, I didn't let it finish.

Crucially, while the Vcore reported average under 1.5, it did show it had hit it at some point, probably a spike on startup.

Turned off the intel profile, PL1 and PL2 to 220, max speed locked to 5.5, undervolt 0.08V got me cinebench at 33k+, V core well below 1.5, under 1.2 on average during run. The start spike was 1.422V and no thermal throttling, good temps on a warm evening.

Curiously I turned the profile back on and tried again with my settings and it let me run, cinebench came back about 26k. So all it seems to do it lock my cores to 5 in the hope it doesn't spike my V core?

What exactly was it supposed to do?

Posted Aug 10, 2024, 5:27 PM UTC

12

Comments aren't archived yet

This post had 2 comments on Reddit. Comments for this period haven't been loaded into the archive yet.