What connector is this?
I've got an old Lecroy 9314 oscilloscope, and finally, the matching PS1715 power supply. All Now what I need is the cable that goes between them. The measurements I've gotten on the connector aren't 100% accurate since my calipers don't fit very well around the PSU enclosure or scope internals, but they're reasonably accurate. It's a keyed 10-pin connector, roughly 65mm in length, 7.6mm wide, with a pin pitch of around 6.3mm.
I expect that current is in the range of a few amps for each of the 4 voltage rails this thing delivers, as it's specified to as much as 8 amps on one rail, and 5 on the rest.
Posted Sep 12, 2024, 12:19 AM UTC
57