Sold my BMX bike and got myself a road bike. It'll be a nice summer. Any thoughts on my purchase, it was 100 bucks.

Posted Jun 16, 2013, 2:02 AM UTC

Posted Jun 16, 2013, 2:02 AM UTC
Fix your misaligned brake pads, then rock that beast!
Otherwise what do you want to know?
The rear one? Already fixed it, picture was from a few days ago.
The bolt holding on the cable to the front derailleur also snapped. But a quick trip to home Depot for a new bolt, washer and nut fixed that.
Mainly I was just wondering if it was worth the 100 bucks.
I'm used to mountain bikes and bmx, so I'm slowly learning about road bikes
The fronts appear to be WAY low, not fully on the rim.
Is it worth $100? Why even think about that? You're not going to take it back if I say "no", are you?
Worth is a very personal answer, anyway. You don't need pats on the back, attaboys, and public confirmation of your decision making to rock it and have a blast, do you?
No, I don't need all that. What I'm looking for is what many others on this forum have asked for. The thoughts of others about if I made a good purchase or not in the sense that I didn't overpay.
I'd just like to walk away with a little more knowledge about road cycles.
How does me telling you that you likely overpaid (the answer is very regional) help make you more knowledgeable about road cycles? I'd pay $100 just to save a day's worth of looking. Others are more price sensitive, others even more time sensitive than me.
That's a perfectly fine bike.
You didn't post drive-side photos, so it's hard to see, but:
It's a late 80's / early 90's End-of-the-bike-boom 10-speed (year judged solely on the nylon caps over the crank bolts and the profile of the crank arms).
I can't read the badge on the seat tube, but it has stamped dropouts in the rear and the shifters are clamped to the stem - both suggesting a rather low end unbutted tubeset. This makes the bike heavier, but not "worse" in a functional sense.
The rims appear to be disturbingly shiny. That suggests at first glance they are steel. You can magnet test to be sure, but steel rims brake poorly when wet, are heavy, and offer no strength benefit to alloy ones.
The brakes are an older design centerpull. Modern calipers are dual pivot side pull for multiple reasons (less weight and more power amongst those) but if they give you adaquate braking performance (can skid the rear on dry pavement and can throw you over the bars when applying the front) they are just fine. If they don't offer such levels of braking performance you should look at getting fancy pads (instead of those $5/pair pads you have now) before replacing the calipers.
The seatpost (not the seat tube) is a cheap chromed steel piece - again suggesting a less expensive bike - but can be removed to quickly judge the expense of the frame. If that is (as I suspect) a 25.4mm post it means your tube set is thick which means the steel is lower grade. If it is a larger seat post (26.x or even a massive 27.2mm) that means your tubing is thin wall and thus indicates higher quality steel.
None of that matters, though. If the bike does what you need it to do it is the perfect bike.
If it does not do what you need it to do you should ask a proper question.
Its a Schwinn World Sport. Not sure of the year, but it has new a new seat, bars, brake lines and has been converted to a 10 speed because the original cranks broke.
So far I've ridden it just under 20 miles and it feels great.