How to keep your AC from getting mildew and smelling!
So, anyone who owns a modern window mount air conditioner knows you never really get all the water out of the drain pan. They are in fact, specifically designed to trap some water that can be picked up by the fan and sprayed on the compressor to cool it (so says the Frigidaire manual). Naturally, a pool of stagnant water sitting in your AC leads to mold and mildew and a bad smell after a couple years. Frigidaire will tell you to have your AC professionally cleaned. My 6000 BTU AC cost me 150 bucks, and I bet buying a new one is cheaper then having it cleaned.
So how do we keep mold and mildew out of this puddle of water in the bottom of our ACs? Pour a cap of bleach into the back of the AC. You only need a 2% bleach solution to kill microbes, so you don't put in a lot, but with a bit of bleach in that water, mold and mildew will never form to start with!
Key point. It is IMPERATIVE that you go outside your house to add the bleach. you want to pour it into the puddle that forms in the BACK of the AC. Pouring bleach into the front of the AC could lead to it blowing bleach filled air in your face, and that would ruin your day.
EDIT: Just another bit of AC maintenance. All those sharp fins on the back of your AC, they need to be straight and not flattened down against one another. If they get flattened, the AC will no longer be able to exchange heat properly and stop working. Try not to bend them. If you have already bent them, go down to your local autoparts store, and tell them you've got flattened fins on your AC's radiator. They'll sell you a tool to straighten the fins without cutting your hands to ribbons.
Posted Jun 30, 2013, 12:15 PM UTC · edited