Link project pricing and update on crowdfunding.
Howdy troop,
So, last night was a big night for me and my Link project (Brass Monkey). For those of you just tuning in, this is my full line of devices built on the Zen2 spec.
The first thing that happened was I got the final numbers on all my parts (except the captivape drip tip, those guys are busy). Which I'll be sharing with you momentarily.
The second thing that happened is I got an Angel investor. I've got some one to fund the CE and initial launch of the Link.
My initial crowdfunding goal was going to be just over 30k. This will cover a small initial run which will then turn into flipped restocks on the Z2. My machinist is making 'more' than I'm ordering initially with the understanding that I 'will' order all the parts they've made. This cuts my costs down significantly and enables me to hit the prices I"m about to share. Some one else took the leap of faith on me so you guys don't have to.
My launch plans are tentatively set for the end of August or early September, the machines are already turning on some of these parts. This gets me much further ahead of schedule than the initial plan so... yay!
I will be listing the price for each part and a description below. There is also going to be a poll at the end of this post so I can get a rough gauge on what 'things' people are going to be picking up. In about a month I should have prototypes to show off but honestly, you don't need much imagination to see what they look like, more details on that below.
###Parts list + retail pricing:
Link zSwitch: $70 - Brass button, stainless switch housing, 24k gold plated contact screw (Gold over Nickel, over Copper, over Stainless steel). Z2 thread. Compatible with all Zen 2 devices.
Link zSwitch Collectors Edition (CE): $80 - This is the same as the above switch, however the stainless switch housing will be Gunmetal nano coated. This is a vapor deposition coating process with a "secret" ingredient. This finish is SUPER durable and a sharp gunmetal gray.
Link z65T: $42 - All brass 18650 length battery tube. Z2 compatible across the board, machined Monkey logo on the body.
Link z49T: $40 - All brass 18490 length battery tube. Z2 compatible across the board, machined Monkey logo on the body.
Link z35T: $38 - All brass 18350 length battery tube. Z2 compatible across the board, machined Monkey logo on the body.
Link z510H: $30 - Stainless Steel 510 head. Gold plated center pin.
Link z510H Collectors Edition: $40 - Stainless Steel 510 head with Gunmetal nano coating.
Link zRDAH: $90 - Stainless Steel Z2 Rebuildable Dripper. Deck and Top cap are all stainless steel, all contact points are gold plated. 1/16th air hole, vertical coil design. 2 ground posts which enable potential dual and quad coil set ups. Internal structure modeled after the Zenesis RBA. Completely compatable with all Z2 devices. Multiple Top cap options will be available after initial release. Including different number of holes and sized holes. (I'll be making a separate post on this specifically)
Link zRDAH Collectors Edition: $110 - Same stats as above but the top cap and deck will be gunmetal nano coated. This will still have the gold contact points.
###Design Notes
Regarding the blatant rip off of the design. I work closely with Zen, all of what I'm doing has been run through him and he's fully aware that I am taking his dimensions, specs, etc, and completely copying it. This fell into the realm of "if it ain't broke, don't fix it". The deck and top design of the Zenesis RBA is great, it's a real solid performer... I'm making modifications to turn it into a dripper, but I saw no reason to modify it 'completely' just to be different in this situation. This also means, due to my choice, that those folks who have existing Zen 2 devices will be able to use the dripper and it will look like it belongs on the device. I'm even going so far as to have the same machined finish on the top caps and the same hole placement as the Zenesis RBA. The top caps from my RDA line will be compatible with Zenesis RBAs. The other parts, like the battery tubes, 510 head, and switch... same situation, I want my system to work with his system, more importantly, I wanted supporting products for my RDA. I can't get "official" Zen products because ENS has the exclusive on that but I can get permission to rip off Zen ;) So I decided to take the specs down to the micron and make aesthetic and material changes to differentiate myself a little bit. This also means current Z2 owners who might want a brass tube or switch, can come pick one of those up from me in the future to go with their device and not have to buy a whole new PV.
The 510 head: This will be virtually identical to the Z2 510 head. Head over to ENS to see what it looks like. I will be adding knurling to the side of the 510 head for functional reasons, it's a beast to take off and put on without something to 'grip' it. It also ties in nicely with the knurling on the switch.
The Bodies: All the bodies are going to match the length of the current Z2 body lengths.
The switch: Right now there is a little design flux on the switch. the part you actually 'press' with your finger will be brass, the knurled body will be stainless. The shape of the button itself may not match the Z2 design exactly, I'm debating flattening it out and putting a very light radius on the edge. It's not fully decided but it won't effect the price.
Gold Plating: The gold plating has been questioned quite a bit. Gold performs better than silver in a long term situation so that's what is being used. The contact points that get plated start out as stainless parts. They are then passivated, plated in copper, the copper is plated with nickel, and the nickel is then plated with 5 microns of 24k gold. The stainless core has 0 effect on the conductivity. This thing is conducting like a solid gold contact, the amount of surface area available and gold plating completely removes the contact points as potential bottlenecks. Brass cores would not perform differently at all and would actually prove to be less durable in the long run. This device is built to last.
###Launch Plans
I am currently planning the initial launch around whole devices. Each device will have 1 head, 1 switch and 1 battery tube. The price will be easy to determine, just take the price of the head, tube, and switch and add em up ;) These are the SKUs I plan to do on the initial launch and how many will be available on day 1. My follow up order will be RAPID. As in, there will be more parts made than I will be launching with but due to the funding situation, I'm not getting 'all' of it on day one. The Collectors Edition parts will ONLY be available on launch day.
15x Link zL510 : 510 head, 18650 battery tube, Switch.
10x Link zM510: 510 head, 18490 tube, switch.
10x Link zS510: 510 head, 18350 tube, switch.
15x Link zLRDA: RDA head, 18650 tube, switch.
10x Link zMRDA: RDA head, 18490 tube, switch.
10x Link zSRDA: RDA head, 18350 tube, switch.
15x CE Link zL510: CE 510 head, 18650 battery tube, CE Swtich, CE Drip tip (custom brass tip from captivape)
10x CE Link zM510: You should be able to fill in the blanks at this point.
10x CE Link zS510:
15x CE Link zLRDA: CE RDA head, 18650 battery tube, CE switch, CE Drip tip.
10x CE Link zMRDA:
10x CE Link ZSRDA:
10x Barrel of Monkeys collection: CE RDA Head, CE 510 head, 18650 battery tube, 18350 battery tube, 18490 battery tube, 1x CE switch and a CE Drip tip. Comes with a special display stand.
For the above SKUs if you want to nkow the price, just look at the price list above, add up the cost for each item in the SKU and you've got your price. I don't have the costs on the drip tip yet so teh CE will be a 'little' more than what you're seeing when you add up the parts (since I don't have the price yet :P). The Barrel of Monkeys collection will have an additional 15 bucks added to accommodate the stand I'll be putting with it.
Post initial launch I will be making all the individual parts available by themselves. The Collectors edition parts will 'only' be available on Launch day however.
And now... please take a moment and take this 1 question survey :) I'm using this to gauge demand and interest, if I see a big enough skew in numbers here from what I'm expecting, I might be able to shift the numbers above. realistically, a lot of people say they'll buy something in the pre-launch but when it comes to putting money on the table "things happen" so I'm taking a lot of the data from this survey with a grain of salt, but it will at least give me the trend on what you guys are 'most' interested in with the stuff.
Posted Jul 4, 2013, 3:46 PM UTC