Monkey University 7-9-2013: Care and Feeding for your gear.
Ahoy Class,
So, you've stockpiled a grand collection of vape gear and it's currently scattered about your house. On one side, that's awesome cause you randomly find a clearo or carto, or RBA you forgot about... on the otherside, you've got crap all over your house! If you're like me, you leave random stuff everywhere and I've found a clearo or something I left somewhere had finally started leaking and covered something I liked with juice. Or... worse, your last carto burns out and you KNOW you've got another box laying around somewhere....
Or on the juice front, you've got your ADV, you bought a 1l bottle of it... now what? how do you keep it from doing bad before you can vape all that delicious lung juice down?
Well, today I'm going to share a few of my tips and tricks for maintaining gear.
First, let's start with batteries.
I'll discuss Ego or 'integrated' batteries first. Always keep them clean and undamaged. If you ever dent one, recycle it and don't just set it down somewhere, dented batteries are dangerous. When charging it, don't leave it somewhere unattended, NEVER charge it unattended in a car, always disconnect it when you're going to bed or leaving for an extended period of time. I'm not sayin camp the thing and stare at it, but don't leave an ego plugged in over night, or while you're gone. Now, what about storage... I have a number of solutions. Coffee cups or those heavy square shot glasses work awesome. Desktop pencil cups or makeup holders also do pretty well. I personally have a couple of shot glasses and a desktop pencil cup sitting on my desk that all my egos go in. The shot glasses are for the ones I'm actively using, the pencil cup is for the others. It's a good idea to take a cotton swab and wipe out the 510 connector on your batteries every now and then. you can use a tiny amount of isopropyl alcohol when you do this to clean em up and cut any juice out of there, don't soak em, just moisten (heh moist) the Q-tip and give em a good wipe out. Make sure they're completely dry before using them.
Now, loose batteries. Things like 18650, 18350, 14500, etc. Same charging rules apply unless you've got a high quality charger that has a 'tend' mode, don't leave these unattended. When they're NOT in a charger or a mod, the best way to store them is in individual battery cases, if that's not an option you just want to make sure they're stored in a way that the battery terminals from multiple batteries can never touch and that they're not sitting on a conductive surface. Don't store batteries in box with kanthal scraps :P you'll macgyver an unintentional vaporizer and instead of juice, you'll vaporize your batteries and potentially part of your house. aforementioned shotglasses work for battery storage or, of you don't want to look like an alcoholic, icecube trays are freaking AWESOME for storing batteries and other vape doodads individually. I personally took a piece of wood and milled out a bunch of holes with forstner bits for each of my batteries because I Love them all equally, like my children. I have no children, only an annoying little dog, some cats, a few chickens, and my batteries... my precious, precious batteries. Now, as far as cleaning. It's a good idea to keep the terminals pretty clean, same trick as above, a lil iso and a q-tip does wonders. No dents... dents bad. If the plastic wrap on the outside of the battery gets compromised you have a potential shorting battery on your hands, especially if it's near the positive end.
Ok, on to "toppers" liek cartos, clearos, etc. If a carto starts to get nasty, a little trick I've got for getting an extra day or so out of them is to take an 18awg needle and jam it up the cartos butt. No really, go in at the 510 side and just slide it in and out like you bought it dinner and took it to a chick flick earlier. wipe off the needle and you'll probably see some black gunk. Blow through the carto into a papertowel and you'll see all sorts of gross stuff come out. Your carto now, should taste better :) This is your 24 hour warning, it's time to get a new carto. Don't boil them, don't ultrasonic them, just chuck em... they're disposable. Clearo heads are similar, you 'can' boil em, or try to clean em up but at the end of the day, they're cheap, chuck em. it's cheaper than what you were smokin before so why bother tryin to pinch that penny so hard. For storage, I go icecube tray. I can put 1 thingy in each cube section and even if they leak, no big deal, it's designed to hold liquids anyway and I can rinse it out in the sink np. When I'm testing RBAs I've got an icecube tray on my desk full of doodads.
When it comes to things like clearo bodies, carto tanks, drip tips, etc, you want to clean em up every now and then. I buy a strong, cheap vodka for this. I'll take a big bowl and put 2 parts hot water and 1 part cheap vodka in it and just chuck all my drip tips and carto/clearo tanks in there (works with RBA parts too). Let it soak a bit, then dump out the liquid and go to town with some qtips, fresh running water, and paper towels. I'll lay out a layer of paper towels on my counter in the bathroom a couple layers thick, and set everything out to dry over night. If you've got hard water, you might end up with some residue, a quick wipe down with a dry paper towel will usually take it off. I 'have' rejuvinated T3 heads and vivi nova heads with the vodka bath before but they didn't last nearly as long the second time and now I just chuck em.
Drip tips, in particular, need to be cleaned. About once a week or so I'll take a paper towel and twist it into a little stick and jam it through my drip tips and pull it out the other side. Pipe cleaners just don't do a good enough job. Every month or so I'll take all the drip tips I used and stick em in the vodka bath (I call it the russian hottub).
I bought a bunch of little snap lock containers at the container store to organize my drip tips and various other 'doodads' you can pick up disposable plastic containers at any grocery store pretty cheap, like 20 for 5 bucks, and use those. The best part is, they stack! If you put something clean in there and seal it, you don't have to worry about it getting nasty between uses like if it sits in a drawer or on your desk collecting dust, cheeto powder, and fingernail clippings.
Threads... you always want clean threads. Clean threads = better performance. If you're using a 510 thing, clean the threads up everytime you take the thing apart. Just jam a paper towel in there and give her a lil twist, if you stay ahead of the curve you'll never need to do a real deep cleaning on it. With mechanical mods if you've got a cheapo chinese one, theres a quick trick to getting the threads a little smoother. Rub a pencil all over the threads, both male and female ends, then screw the device in and out a few times and wipe the black stuff off. The graphite from the pencil will sort of 'sand' the threads down gently and deburr them. It'll work on 'slightly' crunchy threads, not so much on really bad ones but I've had it take a CCTS that kept jamming on me and make it buttery smooth.
Now, juicy juice. You need to keep that stuff fresh and happy! I personally use one of my lil SD Juice cans to hold my ADVs cause I buy them in bulk so I just transfer from the big bottles into the lil cans and that's my normal carry around bottle. If you're not gonna do something like that you need to know a few things. Oxygen, heat, and UV light are the things that 'change' juice the fastest. We've learned that by applying heat you can "steep" a juice in WAY less time than just letting it sit, if you don't want to "oversteep" the juice you need to keep it cool. UV light will also screw with nicotine and some volatile compounds. What has UV light AND heat? The bloody sun! Keep your juice out of direct sunlight for prolonged periods of time. Oxygen is hard to keep away from juice, with real big bottles that I'm not prepping for 'long storage' I'll squeeze the bottle before I put the cap on to get as much air out as possible. Makes the bottles all look weird but whatever, the juice lasts longer. Optimal storage would be a cool but not COLD space, out of direct light and relatively low humidity. A mini fridge is fine, especially if you have your juice in glass bottles. humidity can permeate LDPE over time so long term storage in plastic isn't the best plan.
So... you've got 5l of e-juice you need to stockpile for the vapocalypse... The 'best' container would be a chemical grade mylar bag, you won't want to fool with that, so get yourself some win bottles from a wine making supply shop. Also, pick up some argon while you're there. (you can get this online). What you want is a dark colored, glass bottle with an airtight non natural cork. You put your juice in until it just starts to run up the neck, then you use your little argon can. Argon is heavier than air, so when you stick the nozzle down in the neck you can force all the oxygen out and replace it with inert argon. Carefully cork up the bottle and stick it in the fridge or in a root cellar, some place dark and cold. It'll keep for a LONG time like this. It's complicated and expensive to do it, but hey... they might laugh now, but when the FDAliens come and abduct all our juice and probe our carto holes, you'll be the one laughing. Well, probably not about hte carto hole thing... that's just violating.
That's all I can think of off the top of my head, if you have any specific maintenance and/or storage questions, feel free to ask in here. Or share your own special tricks! No custom made vape stands though, yes, they're neat, but lets look at "on the cheap" solutions!
Posted Jul 9, 2013, 10:43 PM UTC