[FS] [US-GA] TRADING - Dell PowerEdge R730xd/R710 Google/R210 and HP ProLiant DL360 Gen9/DL360p Gen8
Hi everyone! I have the following servers that I'm looking to trade locally in the Metro-Atlanta area. I'm currently running a HP ProDesk 600 G6 SFF with an i5-10500 that I'd like to build out a Proxmox cluster with. I'll trade for anything that can work for this use-case, but the better (or most similar) models will have preference. I'll also trade for low-profile GPUs and am open to general offers.
Have:
Pictures (Timestamps) of everything together. Individual pictures (timestamps) are in each section. I can send video proof of POST for the R730xd, R210, and DL360p Gen8 if you'd like as well. I just didn't feel like compressing and cropping the videos to meet Imgur's limits at the time of post.
- Dell PowerEdge R730xd
- Pictures (Timestamps)
- CPUs: 2x Intel Xeon E5-2620 v3
- RAM: 32GB Total DDR4 (2x SK Hynix 16GB 2Rx8 PC4-2666V-RE1-11)
- Hardware RAID: PERC H730p
- PSUs: 2x 80+ Platinum, 94% Efficiency, 495W, EPP
- Dell-Branded Drive Caddies (No Drives):
- 3x 3.5" SAS 6TB 7.2k
- 1x 3.5" SAS 3TB 7.2k
- 2x 2.5" SAS 300GB 15k
- 8x Blanks
- BIOS: Originally OEMR (branded), however I de-branded it back to stock Dell BIOS.
- Firmware: Updated the iDRAC, BIOS, and PERC versions earlier this week
- Rails: Included. New in box.
- Replaced thermal paste (Arctic MX-6) and CMOS battery (Duracell CR2032) earlier this week.
- Dell PowerEdge R710 Google Chassis
- Pictures (Timestamps)
- Not currently functional but does have some parts. Would be a cool display piece or fun rebuild project.
- Dell PowerEdge R210
- Pictures (Timestamps)
- CPU: 1x Intel Xeon '08 X3460
- RAM: 16GB Total DDR3 (4x Vaseky 4GB PC3-10600 1333mHz 1.5V 240-Pin Unbuffered DIMM)
- Firmware: Last updated over a year ago, but there shouldn't be any newer releases since it's EoL.
- Rails: Included
- Replaced thermal paste (Arctic MX-6) and CMOS battery (Energizer CR2032) earlier this week.
- HP ProLiant DL360p Gen8
- Pictures (Timestamps)
- CPU's: 2x Intel Xeon E5-2609 v2
- RAM: 48GB Total DDR3 (6x 8GB Sticks)
- PSUs: 2x 94% Efficiency, 460W, PLC B
- Rails: Included
- No drive caddies. Just has 3d-printed blanks.
- HP ProLiant DL360 Gen9
- Pictures (Timestamps)
- No CPUs or RAM. I pulled the CPU from this and added it to the R730xd.
- PSUs: 2x 80+ Platinum, 94% Efficiency, 500W
- Rails: Included
- All the drive bays have blanks.
Posted May 7, 2025, 2:28 PM UTC
03