APC9KSD2 x ZWolf grip photo gallery + useless info.

https://imgur.com/a/zmti7So

This might help some of you as it’s hard to find examples of how things look when installed.

Zwolf grip with plug is around 10 grams heavier than stock B&T grip - without plug it’s 4-5 grams heavier.

Less wrist strain in firing position using Zwolf grip due to more vertical angle. Nice tight fit on the lower. Using stock screw - the screw does not touch the lower - there’s roughly ~ 2MM gap when installed. I measured screw protrusion from the grip then measured the available space for the screw in the lower.