Fixed cable issues now running horrible.

So long story sort of short I had a sticking throttle since I bought my 07. It would stick about 2-300 rpm off idle until I rolled throttle forward. Decided to add aftermarket cruise which mad problem an issue finally worth looking into. I found an extra spring attached to throttle arm on throttle body (like lawnmower spring that didn't belong) I disconnected this spring and lost all return. I found outside throttle springs completely unwound and rewound them 1 turn each. Found throttle cables not routed correct after someone had added risers. All these things fixed throttle return and stickiness after removing spring that didn't belong. Bike idled and seem to run fine but today (1st time riding since repairs) she acts like she's down cylinder or more until opened up. It looked to me like 2 throttle body's were opening off idle before other 2. Could this be issue or is that normal operation?