Is this gcode a good base to input into Kiri:moto for my slicer profile?I'm not the most familiar with gcode and did not write this, and I don't want to F anything up.

{ "bedWidth": 220, "bedDepth": 220, "maxHeight": 270, "nozzle": 0.4, "extrudeAbs": true, "gcodePre": [ "G28 ; home all axes", "G92 E0 ; reset extruder", "G1 Z2.0 F3000 ; lift", "G1 X0.1 Y20 Z0.3 F5000.0 ; move to start", "G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; prime line", "G92 E0 ; reset extruder again" ], "gcodePost": [ "M104 S0 ; turn off extruder", "M140 S0 ; turn off bed", "G91 ; relative positioning", "G1 E-1 F300 ; retract the filament", "G1 Z+0.5 E-5 X-20 Y-20 F9000 ; move away", "G28 X0 Y0 ; home X and Y", "M84 ; disable motors" ] }