Hi all - I am looking to replace some old fluorescent tube lighting in our kitchen and upgrade it to some new LED thin lighting strips. That being said—I have some questions about how I would go about doing this.

In the attached image—there are three sections where the light is located indicated by the red arrows. All three of this lights are connected to the light switch circled in red. Each of these 3 locations there is existing wiring for each light. My questions are:

1) Since there is already preexisting wiring (120V) to each section, would I need to have 3 separate DC 24V transformers connected to each area? I don’t believe I can just connect one transformer in the beginning of the circuit since I need to be able to connect the wires to something in each location In order for the LEDs to work.

2) If I were to make these dimmable—would I need 3 separate dimmable drivers for each location?

Is there anything else I may be missing and/or things I need to consider?

Hopefully this makes sense—as you can probably tell I am a total zero when it comes to stuff like this.

As far as materials I planned on getting—they are the following:

Dimmable drivers: EMITEVER 25W Triac Dimmable Driver,Power Supply,AC 120V to DC 24V Transformer,Compatible with Lutron and Leviton Dimmers,for LED Lighting,Class 2,ETL Certified https://www.amazon.com/dp/B09ZL79D68?ref=cm_sw_r_ud_dp_ES7EW3T9JMV2500572P8&ref_=cm_sw_r_ud_dp_ES7EW3T9JMV2500572P8&social_share=cm_sw_r_ud_dp_ES7EW3T9JMV2500572P8&language=en-US&csmig=1

LED Light strips (x1): EMITEVER COB LED Strip Lights Neutral White, 4000K Tape Light Premium High Density, 24V, 300+Lumens/ft, 2400LEDs/Spool, Ra 90+, 16.4ft, 3W/ft, UL Listed 5 Year Warranty (Power Supply Sold Separately) https://www.amazon.com/dp/B09Q8HNTGR?ref=cm_sw_r_ud_dp_PMHGYFMZSZR84SD5C37R&ref_=cm_sw_r_ud_dp_PMHGYFMZSZR84SD5C37R&social_share=cm_sw_r_ud_dp_PMHGYFMZSZR84SD5C37R&language=en-US&csmig=1

Power Pack: EMITEVER 24Volt LED Driver 60W 2-Pack, ETL Listed Waterproof IP67 Power Supply Low Voltage Transformer 120V AC to 24V DC Converter for LED Strip, Cabinet Tape Lights,LED Display and Outdoor Lighting https://www.amazon.com/dp/B0CLLWF4F7?ref=cm_sw_r_ud_dp_B9S7YPBEF23QX8AVPNFK&ref_=cm_sw_r_ud_dp_B9S7YPBEF23QX8AVPNFK&social_share=cm_sw_r_ud_dp_B9S7YPBEF23QX8AVPNFK&language=en-US&csmig=1

Under Cabinet Lighting (*for dummies*)

Under Cabinet Lighting (for dummies)