Hi, please help. Some details before I start explaining the issues. I live in arizona, I bought the Saturn 4 Ultra last year during summer, I have the printer in the garage inside a tent with a extraction tube and fan, I always print with the  garage door partially open and some times the tent door open, I use Sunlu ABS like resin. The machine always shows temp between 100 and 120 degrees, never had print issues until now. I continued printing a lot during winter since the weather was perfect but once summer arrived this year I decided to stop printing entirely until summer was over.

The hot summer is finally over and I decided to start printing again. I have the printer in a tent, I cleaned the resin out and replaced the PFA film before printing and poured new resin in. Nothing has changed with the machine itself, the only thing that has changed is the new chitubox software that's entirely different now. Once I updated it I looked through the settings and imported all the settings I had so nothing has changed as far as I'm aware.

 Here are pictures of what happened to one of the prints. I've done prints like this one before where it's a torso with a wide jacket and never had problems. Does that look like it has to do with my settings or machine issues? Every print that I've done since summer ended have basically failed


Is my Saturn 4 Ultra done for?