So I've had the tornado for about 2 weeks now. I was real excited for the "bio-availability", truly on the hype train. But when I got it, it was underwhelming. It either didn't heat properly and under roasted my material or I would up combusting. 

But after much tinkering I think I've found a method that works pretty well so I thought I'd share for any fellow owners or people who are interested in getting it. 

So here's the method, I'm not sure if it's been posted before but I call it the high low. 😁 
Disclaimer: I use the ispire wand at 500f / 260c to heat the tornado. 

1. So first you load up the chamber as usual, I use a fairly full dose but loosely packed. (You might have to tinker with the method for half doses) 

2. Then your first heat up is gonna be halfway up the cylinder, inserting the tornado from the bottom of the ispire wand. (Pics attached). Heat it up to the second click and maybe 4-5 seconds more. 

The vapor is minimal and you get some of the flavour of the bud but not too much crazy vape smoke (yet!)

3. I then finish out the little wisps, blow on the top of the cap till it clicks twice and then my second heat up is where it's traditionally recommended to heat it, aka above the little dots. (Pic 2) 

Again, heat till the 2 clicks and 2-3 seconds after. Now you get the really thick vapor and you get a full extraction of the material. 

I managed to get a perfect roast and more smoke than I could handle using this method. 

Lemme know what methods y'all have been using 😊

New wand heating trick for the vestratto tornado!