How to Import Presets (Basic, for GLM 4.6 REASONING ONLY)
THIS IS ONLY FOR CHAT COMPLETION MODE.
1. Go to "Ai Response Configuration" from your top menu bar, then click on the blue circle icon to import the json file. Regardless of "reasoning" being enabled or not, this is how you import a preset.
2. These are the sampler settings I have for DIRECT API. I always have streaming off, which can solve problems before they begin. You don't need 60k if you have reasoning disabled.
As for samplers, I highly recommend the FP and PP to be zero.
Top P, 1.0 seems okay? When my preset was 6.9k tokens, I needed it at .95 for coherency. At the moment, my preset is 3.7k.
Temperature, you DO NOT need this low if your preset is much smaller!
Preset size (my personal estimates)
2k or less, temp .85 to 1.0
2k or more, temp .60 to .85
If you feel it's too incoherent, try lowering a bit. Too stiff, try increasing.
DIRECT API can only go up to 1 for temp; anything higher will yield errors.
If you're not using Direct API, your samplers may look like this. I have no idea what settings you should use, please ask the preset maker or fool around with it..
- Not a part of the import process, but everything at the bottom there? These are the prompts that make up the preset. As you can see, my layout is a mess. You can edit, enable, disable, etc. If you aren't sure what certain ST feature does, hovering over the icon will usually tell you.
Posted Nov 5, 2025, 11:47 PM UTC