Good Morning KS!

Been a While! Holidays are coming up and the Family Gift List is completed; Selling these all to fund those Gifts. Happy to take reasonable Offers!

**For the Rosie Clones they are all referenced by Numbers so please Specify which if you want to buy one!**

TIMESTAMP

✅✅✅Divo Fireball (Blue Carbon)

SV - $200

• Owner: 1st Owner
• Condition: Very Light use on Amazon Boxes, still very Sharp. Light Scratches on the Pocket Clip but no other Scratches
• Blade: S90v Factory Edge
• Disassembled: No
• Box: Box w/ Stickers/Cloth

✅✅✅Protech Operator Mordax

SV - $225

• Owner: 1st Owner
• Condition: Cut couple Amazon Boxes, Pocket Clip is notorious in getting scratches but no other scratches on blade/scales
• Blade: Magnacut Factory Edge
• Disassembled: No
• Box: Box w/ pouch

✅✅✅Null Knives Raiden R2 DamaSteel

SV - $400

• Owner: 1st Owner
• Condition: Almost LNIB, Knife has been carried once and Original Satin hardware have been replaced with Burple Hardware.
• Blade: DamaSteel Factory Edge
• Disassembled: Yes
• Box: Box w/ Stickers

✅✅✅CKF Rotten Evo 4.0 TANTO (DLC)

SV - $400

• Owner: 1st Owner
• Condition: Impulse buy from me, Swapped out the Bearings to Thick Washers but other than that no Carry or Cutting was done. Lost the original set of Bearings but will still have Back up Bearings included in the pouch
• Blade: S90v Factory Edge
• Disassembled: Yes
• Box: Pouch

✅✅✅Miguron Geddon (DLC)

SV - $225

• Owner: 1st Owner
• Condition: LNIB Carried once by me and put in my case since then, no marks or scratches can be seen. Just too fucking big LOL
• Blade: M390 Factory Edge
• Disassembled: No
• Box: Box Included

✅✅✅Reate T1000 V2 DLC Crystal Green Zirc (#12 Cranes Cutlery Exlc.)

SV - $550

• Owner: 1st Owner
• Condition: Never Carried only flicked around however during a attempted Skiff Installation I ended up scratching the screws and the Skiffs never fitted lol. Lost one ball in the bearings, however, Deployment is still smooth. Scratches on the External Stops due to them hitting the frame (Common on DLC T1000s)
• Blade: M390 Factory
• Disassembled: Yes
• Box: Box w/ Extra Screws/COA

✅✅✅Oz Clone #1 Jufule Zig Zag

SV - $65

• Owner: 2nd Owner
• Condition: No Scratches or Blemishes, lightly used by previous owner and me. Skiffs Installed. Original Bearings Not Included
• Blade: 154cm Factory Edge
• Disassembled: Yes
• Box: Box Included

✅✅✅Oz Clone #2 Lemifshe Skeleton

SV - $65

• Owner: 1st Owner
• Condition: No Scratches or Blemishes, lightly used by me. Skiffs Installed. Original Bearings Not Included
• Blade: VG10 Factory Edge
• Disassembled: Yes
• Box: Box Included

✅✅✅Oz Clone #3 Jufule Radial

SV - $60

• Owner: 1st Owner
• Condition: No Scratches or Blemishes, lightly used by previous owner and me. THICK WASHERS installed, Original Bearings Not Included
• Blade: 154cm Factory Edge
• Disassembled: Yes
• Box: Box Included

✅✅✅Oz Clone #4 Lemifshe XL Rosie

SV - $70

• Owner: 1st Owner
• Condition: No Scratches or Blemishes, lightly used by previous owner and me. Skiffs Installed. Original Bearings Not Included
• Blade: D2 Factory Edge
• Disassembled: Yes
• Box: Box Included

✅✅✅Oz Clone #5 Lemifshe M390 CrossHatch

SV - $100

• Owner: 2nd Owner
• Condition: No Scratches or Blemishes, lightly used by previous owner and me. Original Bearings, Unsure if Disassembled by Previous Owners but not by me
• Blade: M390 Factory
• Disassembled: No(?)
• Box: Box Included

✅✅✅Jufule Cortex XL

SV - $65

• Owner: 1st Owner
• Condition: Light Scratches on the blade, The Blade was Modified by me so when Disengaging the lock it does not catch on the finger
• Blade: 154cm Factory Edge
• Disassembled: Yes
• Box: Box Included

✅✅✅Lemifshe Les George VECP

SV - $65

• Owner: 2nd Owner
• Condition: No Scratches or Blemishes, lightly used by previous owner and me. Blade Came to me very Dull but not sharpened according to the previous Owner
• Blade: 154cm Factory
• Disassembled: No
• Box: Box Included

✅✅✅Royat Stitch Clone

SV - $70

• Owner: 2nd Owner
• Condition: Light Scratches on the Satin part of the blade and Pocket Clip, Action and Detent is super good on this one.
• Blade: D2 Factory Edge
• Disassembled: No
• Box: Box Included

That's all I have Folks!

PAYPAL F&F No Notes Pls!

I prefer Chat over PM

As Always YOLO > CHAT

**🚢🚢**Priority Shipping for CONUS (Lower 48)****🚢🚢

👉👉👉NO FORWARDING SHIPPING ADDRESSES

I will try to ship everything by the Weekend latest on Monday!

Have a good one! And Thanks for checking out the post 👌