r/sewhelp•
nocrn

question re: durability of a stitch for NICU blankets that will be washed heavily and often

Hi there,

I'm a NICU nurse and have been wanting to pick up sewing for a while. We have tons of single layer flannel blankets for swaddling and lining the beds that were donated by a local organization, but there never seems to be enough gender neutral (read not pink) blankets.

I have a Brother XL 2600I arriving tomorrow, bought 4, 1-yard pieces of gender neutral (and adorable) flannel and I just have a question regarding the stitch.

I've looked up tutorials online and it seems like most people suggest to serge the edges (which I don't think my machine can do) or do a diagonal zig zag stitch on the edge with a straight stitch below it. Most tutorials advised against hemming the edges because of how long it would take.

These blankets will be washed in high heat and frequently so I want to know if the diagonal zig zag stitch method will hold up to that kind of trauma? I don't want the edges to fray.

I plan to practice on some junk fabric first, but this project should be pretty simple since I'm only finishing the edges of a single yard of flannel. I'm not gonna lie, I can take care of a baby on a ventilator that breathes >500x a minute, but the sewing machine scares me. Luckily my husband knows how to sew (which I find pretty sexy by the way) so I'll probably be able to blundgeon my way through it.

TL;DR I just want to know if the diagonal zig zag stitch will hold, or should I just do the hem thing? Or is there an even better idea? Or is their a sewing machine that can do the serge thing that I should buy instead?

I've attached some of the tutorials for reference, in case I didn't explain this properly.

Thank you so much!

Edited for correct terminology.

Posted Oct 30, 2013, 1:01 AM UTC · edited

67
ro4snow•

I'm so glad when I can help on this subreddit!

You have an awesome job and it sounds like you are great at it. Go you!

A couple of ways to go with this. Zig zag edging would definitely work. After repeated washings, you may see some fibers between the zig zags, but it won't unravel the edges, which is what you want. Look for the adjustment (maybe stitch length?) where the zigzags are closer together, more like a satin stitch.

http://0.tqn.com/d/diyfashion/1/5/D/D/-/-/zigzag_stitch.jpg

It would be better to have the stitches towards the right hand side of the illustration, slightly tighter that big zigs.

I looked up your machine on Amazon. It looks like it comes with different feet? If it does, and you have the rolled hem foot, like the Amazon one, that would work great on this project.

It is like what is edged on a cloth napkin, or a scarf. Here is a youtube with an explanantion:

http://www.youtube.com/watch?v=WVA6fOARxY4

This encases everything and is a lot quicker than a regular hem. It just takes a little practice, but the rolled hem foot is great. Don't worry if the start area is a little wonky, you can catch it when you come back to that point at the end of sewing.

Also, I wanted to mention that the zig zag takes a lot of thread, just fyi.

A serger would work really well in this application, but they are expensive, maybe $600 or more. Maybe you know someone that has one and could do this?

Have you considered looking for a sewing group in your area to do this for you? Unless you really want to do it yourself?

There is a group called ASG, American Sewing Guild, that does charity sewing. Also, if you have Meetup.com in your area, there may be a sewing meet up that could do this.

Good luck.

3
nocrnOP•

Thank you so much for your detailed response!

I ended up prepping one of the blankets already. Using an iron, I folded it once over and then over again, so I have about a 1/4inch folded over on each edge.

If I'm understanding you, and the video correctly, if I use the rolled hem foot, I can have it guide the stitch across the edge better, right?

I looked at my manual and it does appear that my machine has that ability, but I don't have the machine delivered until later today, so I won't know for sure until then.

My initial plan after doing more research and reading the responses here, was to do a straight stitch along the edge and then zig zag above it to reinforce it. If I do the rolled hem, it sounds like it would be just as secure but less work and thread. Am I understanding you correctly?

That's a great idea about joining a local sewing group. I'll definitely look into that. As for leaving the blanket making to the charity groups, I like the idea of getting to give back to my babies and families by donating these blankets. If I get good enough at it, I might even consider making nicer blankets to send with the babies when they finally get to go home. So far, I'm really enjoying this whole process anyway and it might become a hobby I can really get into.

Thank you so much again for your help!

1
ro4snow•

First of all, I understand your wanting to make the blankets yourself. It is gratifying for you and such a gift to the babies.

If you end up trying the rolled hem foot, you don't need to press the hems before sewing. You start by rolling the edge, feeding that into the foot to get it started. Then the rolled hem foot takes over and rolls the raw edge under and stitches a hem. So it saves a step.

But you are not making a hundred of them, so if you want to iron the hem and stitch, you will get it done quickly enough.

I agree with the idea of sewing a straight stitch along the edge then zig zig. That will prevent unraveling.

Rolled hem would be neater, less thread and quicker than straight stitch and zig zag, but either way you go, would all work fine.

I hope that answers your questions.

I also hope you really enjoy sewing. I love it. You are starting with a great, easy project and you should feel confident after a couple of blankets.

2
kallisti_gold•

First thing you want to do is put the fabric through a washing machine. This preshrinks the fabric, gets out nasty preservatives used to keep the fabric from degrading before it's sold and sewn, and frays the cut edges as far as they'll fray.

Now, there are some types of fabric that don't fray. If your fabric comes out of the wash with neat cut edges, you don't need to do any sewing at all.

3
bklyngrrrl•

If I am understanding you correctly, you want to sew the edges of the single layer new blankets so they won't fray. Ok - you can sew about a quarter inch around the perimeter of the blanket, using a small straight stitch, then do a zig zag stitch (what I think you call a diagonal stitch) around the edge. The two stitches together should keep it from unravelling.

2
nocrnOP•

Yes the zig zag. Sorry for my terrible grasp of terminology. So doing it that way would be pretty sturdy to repeated washes?

1
[deleted]•

[deleted]

1
cursethedarkness•

I hate hemming, so I line everything instead. In this case, I'd make the blankets from a double thickness of flannel. Sew two pieces together like a pillow, right sides together, around the edges, leaving a small opening so you can turn it right side out. Press, then top stitch all the way around (1/8" or so from edge. Very, very sturdy that way.

1