Hi everyone, I've got an issue with my 2016 street tripple 660 (675 with lightly smaller engine to meet Australia/NZ LAMS requirements)
Backstory:
Today, I rode it in for a driving test, it worked great the entire way there. I went to the testing station, did my paperwork, went out with the instructor, and started my bike. It started and idled fine whilst a he check the brake lights and indicators. Once we where ready to begin the test, I went to ride out of the testing station and the bike died. The instructor helped me push start it, which didn't work. I walked it to an auto electrical shop nearby, and they got it started/running fine with a jump pack, tested the alternator and it was making over 13V
They replaced the battery and it worked fine. I took it to a couple shops (probably a 10 minute ride, then 5 mins, and then 25 back home, started OK each time) on the ride back home it seemed a little rough but not too bad on the way back. Idle seem slightly off. When I pulled into my driveway, and held the clutch in while I checked my mailbox, the bike died.

I tried starting it (see video), it started ok but then died. Started again and died when adding throttle.  Now pressing the starter does nothing. New Battery(motobat MBTX9U) has plenty of voltage and had more CCA than OEM, and is only about 1hr old at time of posting

Any idea on things to check?

Street triple dying after start