I made a [wall mounted filament rack & shelf bracket model](https://makerworld.com/en/models/2435556-wall-mounted-filament-rack-shelf-brackets#profileId-2672102) with some simple labels and two people messaged me and asked if I could add more labels and more ways to mount them. Since I already had the basic design done I said sure and came up with these.

There is a batch of "basic" labels and then a set of "detailed" labels along with multiple mounts. All the labels slide onto the mounts so you can print a set of labels then only the mounts you need. I made a set for most rods covering the standard US closet rod sizes you can buy at the box stores (34mm / 1.31in for [heavy duty](https://www.homedepot.com/p/Everbilt-96-in-W-White-Heavy-Duty-Steel-Closet-Rod-EH-WSTHDUS-313/300262764) and 32.5mm / 1.28in for [standard](https://www.homedepot.com/p/Everbilt-1-pack-72in-W-white-Regular-Duty-steel-Hanging-Closet-Rod-EH-WSTHDUS-316V/334188584)) along with the standard broom handle sizes (28mm / 0.125in for [heavy duty](https://www.homedepot.com/p/Quickie-60-in-L-x-1-1-8-in-Thick-Tapered-Handle-54103/100142509) and 24mm / 0.98in for standard). Once those were done I made a batch for sliding onto the edge of shelves ranging from 1/4" through 1" in 1/8" increments that just friction fit.

Super simple but effective, no supports or glue needed: [https://makerworld.com/en/models/2456977-filament-labeling-system-for-rods-or-shelves#profileId-2697682](https://makerworld.com/en/models/2456977-filament-labeling-system-for-rods-or-shelves#profileId-2697682)

  
I've also included the FreeCAD file so you can make your own labels easier then trying to do it within the slicer with instructions.  Everything is labeled to hopefully make it easy even if you haven't used FreeCAD before.

Labels for Filament Racks & Shelves - Snap or Slide On - With FreeCAD file to make custom labels