Doorbell chime box issue

Hello all,

Context:

thankfully our dog woke us up in the middle of the night due to a loud humming noise coming from our chime box.

The chime box also had a burning smell.

After inspecting the rear doorbell plunger was receiving power and or vibrating as it was pushed down.

I tried pressing the doorbell button a few times to see if it would release the plunger. It did not. It was very foggy and lots of moisture out tonight which could have played a factor.

The transformer is attached to a plug outlet in the utility room, I’ve turned the breaker off for this plug and the humming is now gone and the plunger is not longer pressed down.

I tried touching the plunger to move it, dumb move by me, it was very hot and burned the tip of my finger a little.

Question time:

Can I just remove the back door chime wire and cap it, then turn power back on and use just the front door?

Or because of the burning smell, best to bring in an electrician to inspect the wires, transformer, and buttons?

Thank you!

Posted Mar 8, 2026, 9:00 AM UTC

32

Comments aren't archived yet

This post had 2 comments on Reddit. Comments for this period haven't been loaded into the archive yet.