RSVP strange behavior on Junos 25.2R1.9 (EVE-NG)
Hi.
While best IGP path between ingress and egress points of a static LSP doesn't pass through a particular router which I restrict bw on it, but again LSP doesn't come up stating "there is no requested bandwidth".
PE routers are R1 and R10 and as seen below, best path is through R2, not R7, which was shown as yellow.
root@R1# run show route 10.0.0.10/32
10.0.0.10/32*[OSPF/10] 00:08:50, metric 4
> to 10.1.2.2 via ge-0/0/2.0
to 10.1.7.7 via ge-0/0/3.0
However LSP logs says path doesn't have enough bandwidth & I don't know why. Any idea?
root@R1# run show mpls lsp detail
Ingress LSP: 1 sessions
From: 10.0.0.1, State: Dn, ActiveRoute: 0, LSPname: R1_TO_R10, LSPid: 2
ActivePath: (none)
LSPtype: Static Configured, Penultimate hop popping
LoadBalance: Random
Follow destination IGP metric
Encoding type: Packet, Switching type: Packet, GPID: IPv4
LSP Self-ping Status : Enabled
Primary State: Dn
Priorities: 7 0
Bandwidth: 10Mbps
SmartOptimizeTimer: 180
Flap Count: 0
MBB Count: 0
4 Mar 10 11:06:55.667 10.1.7.7: Requested bandwidth unavailable[8 times, first Mar 10 10:57:33.639]
Total 1 displayed, Up 0, Down 1
Posted Mar 10, 2026, 11:26 AM UTC