[Troubleshooting] In the process of building my first PC, need some help

When I boot up my monitor, I receive an error message that says DVI No Signal. The picture that I linked shows the parts that I am not sure where to place. The error message occurs even when these cables are not included. The 3 large cables that have thin yellow and red wires are from the power supply unit, the 2 black wires that each have three plugs are from the GPU and the 5 other wires are from the case. The other parts are from the GPU and Motherboard, but I am not sure whether they are necessary.

Main Part List: NZXT Phantom 410 Case Intel i5470k Asus Z87-Pro EVGA Geforce GTX 770 Rosewill 80+ Gold PSU

http://imgur.com/qt4nvZS

Posted Dec 27, 2013, 3:25 AM UTC · edited

15
Ouchiess•

You didn't link a picture.

1
CallmeCholOP•

Sorry, I'm on my phone. I edited so now there is a link

1
Ouchiess•

Alright well if you're hooking up a monitor to a graphics card one of the first things you should check is if you've made all the proper connections on your GPU. On the majority of them there should be 3 connections made, the GPU should be in a PCIe slot and two wires should come to the "top" of it (directly on the opposite side of the PCIe connector), one being a 6 pin and the other an 8. If you've made these three connections already, I suggest unplugging all of them and once again plugging them in. You'd be surprised how often that's the solution. Report back for/with any more info!

1
CallmeCholOP•

I have plugged in the 6 pin and 8 pin into the GPU and both of those connections into the Power Supply, but still the same error message. I plugged them in and out a couple of times but still no luck

1
Ouchiess•

Your PC is starting up fine, correct? Perhaps you have an extra monitor to test, to maybe isolate the issue?

1