*I tested the first batch of Sora v3. Some reviewers (not me) reported early-batch sensor issues, but they were all addressed by the latest firmware. But they finally did it, but there were some turbulences on the way.*

# [Unboxing and Sound Test](https://x.com/KapitanKloze/status/2021168982821138512?s=20)

# What’s in the box?

* Ninjutso Sora v3
* 8k dongle
* big skates
* ten dot skates
* Ninjutso stickers
* USB-A to C braided cable
* manual

# What’s new?

New hardware inside, new skates (pure PTFE) that are not applied upon shipment (you can decide yourself what to use), much improved battery life, new sensor from Pixart (not a typical 3950), new options in software, improved shell density. That’s pretty much it, but it actually makes a difference.

# How does the shape feel?

The Sora V3 uses a classic wedge profile — a low, narrow front that slopes into a pronounced rear hump, giving the mouse a light, agile feel in the fingers while anchoring the palm for claw-style control. The mouse starts really low, where the fingers and fingertips are, then it goes up gradually in the midsection, up until the pronounced hump at the back. When you look at it from the profile, it reminds you of a triangular shape, a classical wedge. The back hump gives your palm additional support. Another important element of the wedge shape is that the sides angle inward toward the grip, with lower sidewalls that create finger-locking points, and a slight rear flare gives pinky support. This combination makes the mouse feel stable and locked in despite being small.

The closest alternative to Sora v3 and also members of the “Wedge Club” are Pultas X2H, Scyrox V8, and Lamzu Atlantis Mini. It’s mostly targeted at the claw grip users, even though relaxed claw users and even finger tip maniacs can have a good time with this shape.

How does it compare to Sora v2? Well, you don’t notice it at first, but actually, after some time with it, I can say that Sora v3 feels just a bit smaller in almost every category: click height, width, hump, and length. Not a big change, very small and almost unnoticeable, but it is there, and you should know it.

# How’s the build quality?

Ninjutso increased the weight by 1 gram (compared to v2) by adding an internal skeleton support system for a stronger shell structure. It’s said by Ninjutso to be 2x stronger in build than Sora v2 (40 gram mouse with a build of a 60 gram mouse). The only flex I could perform was when I squeezed the front sides with some force, but I can assure you it is not something you do in-game. Nothing else in the build quality of the mouse, the cable, or the beautiful dongle could cause any issue for anyone, I reckon. The mouse has a really strong and almost premium build quality.

# How are the clicks and buttons?

Sora v3 features Ninjutso’s own click solution called HyperClick. It’s a firmware solution powered by Ninjutso’s SPDT mechanical switches (similar architecture to Ten/Ten Air). It’s supposed to reduce click latency, optimize how the firmware reads the switch actuation signal, and help register very fast consecutive clicks more reliably. In practice, this means a slightly snappier click response, fewer missed clicks during rapid tapping, and better performance in games where click timing matters. It’s basically a low-latency click mode. There are usually no real downsides, so most gamers leave it enabled.

These clicks are well-tensioned, there’s almost no side-play, almost no pre/post travel, and they also rebound quite fast. The same goes for the scroll wheel and side buttons. Additionally, the main buttons have slight grooves to help you position your fingers more in line with the mouse.

# How’s the coating, weight, and skates?

The coating on my white copy is a bit chalky; it is clean, and it doesn’t attract fingerprints. I am planning to get the black version too, and there you will notice some marks left by your fingers, I am sure, but this one’s clean as clinical whiteness. It’s also quite grippy, especially when your hand warms up a bit. I absolutely have nothing to complain about when it comes to the coating.

The weight on my scale comes around 40grams without any skates applied. The dots add around 1 gram more, and the big skates add 2 grams. It’s worth mentioning that Ninjuts managed to keep this lightweight despite improving the main shell a lot. The mouse is well-balanced, and the sensor is in the center position.

As far as the skates are concerned, Ninjuts ships the mouse without any skates installed. And that’s what I’d like to see from every mouse brand, because you get to choose which skates you want to apply: dots or big skates (both provided by the brand). And their material is pure PTFE this time, the big skates are rounded and glide very well. The dots are not that perfect, and I wish more attention were paid to them, even though they are also pretty decent.

# How’s the battery life?

According to Ninjutso, traditional sensors like PAW3950 consume 10x more power when lifting the mouse, and FPS games involve frequent lifting/resetting, leading to actual battery life much lower than advertised. Their technology, called SymVision, intelligently detects mouse state, keeping lift-off power unchanged, reducing it by 90% vs PAW3950. That leads to actually impressive results with the battery unit of 300 mAh — 3.5 weeks at 1k is what they advertise, and from my testing, I found that my results are actually really close to that number. These are the numbers they advertise:

8000Hz — approx. 1 week

4000HZ — approx. 1.5 weeks

2000HZ — approx. 2 weeks

1000Hz — approx. 3.5 weeks

I used my own settings (Burst Mode on, Ultra Mode on), which brought these numbers down around 25%, but it’s still a massive result, and we should applaud Ninjutso for that.

# How does the sensor perform, and is the software any good?

Some early reviewers reported tracking and DPI issues with the new Ninja2 sensor, but I didn’t notice them. Moreover, Ninjutso quickly released a new firmware update that fixed the issue; no sensor issues have been reported since then. I am sure the first retail batch will ship with the new firmware (my unit was the early reviewer unit, as you can see in the pictures — the retail version will not have the unit number or the small v3 logo on the left side).

Even though I have upgraded my Sora v3, I didn’t notice any weird behaviour before that — no spinouts, not bizzare stuff, no cutouts, no LOD problems. I’ve tested it on Artisan mousepads, some other cloth pads from Tenta-x, and also on glass — it all worked well.

It’s worth mentioning that the new sensor is capable of running at 22k FPS due to the “Competitive Plus Mode.” It also has a new Motion Sync (I don’t use it myself because it adds a small delay). Also, no Motion Sync option to turn it off, as it is hardware-enabled.

The Ninjutso software is pretty good, I have to admit — it’s for desktop, but there’s also the web-based version. It’s pretty light and loads up quickly and has some interesting features, like:

* Burst Mode: it changes how the mouse firmware handles click signals before sending them to the PC. Basically, you want this ON for competitive play because. The difference is very small, but competitive players often enable it anyway because it theoretically reduces click processing delay.
* System Mode (HS, Competitive, Ultra) — it controls how aggressively the mouse firmware prioritizes performance, latency, and power consumption. Ultra → best performance for competitive FPS, Competitive → safest default if you want balance, HS → only if you experience instability
* Slam Click: it prevents the mouse from double-clicking and slamming the mouse against your mousepad

The rest is self-explanatory, like HyperClick (a click-processing enhancement) or HyperScroll (it affects how the scroll wheel signals are processed), even if they are not listed in the software, they are implemented in the Sora v3.

I am very pleased with the software of Ninjutso; the company really pushed forward to deliver us the best experience in this category.

# Who is it for?

If you liked the shape of the Sora V2, the Sora V3 will feel instantly familiar. Ninjutso didn’t try to reinvent the design here — the shape remains almost identical, with only very subtle tweaks that most people will barely notice in practice. What really changed is everything inside. The hardware upgrade over the V2 is significant, but the biggest improvement by far is the battery life, which is simply outstanding compared to the previous generation.

This makes the Sora V3 an easy recommendation for anyone who already enjoyed the Sora shape but wanted more modern internals and longer runtime. It’s a fantastic small-to-medium mouse that naturally favors claw grip users thanks to its wedge-like profile and rear hump, but it’s not limited to them — relaxed claw and even fingertip players can feel right at home here. In short, if you liked the idea of the Sora before, the V3 finally feels like the version where everything clicks.

# TL;DR

* The perfect wedge shape is back
* ideal for claw grippers
* unnoticeable, very minor shape changes to Sora v2 (Sora v3 feels a tad smaller in almost every category)
* much improved hardware inside
* skates are again pure PTFE, upgrade to Ten/Ten Air
* Much improved build quality overall, but not perfect
* The new AimNinja2 Pro 45k sensor is implemented very well (don’t forget to flash the new firmware!)
* The software allows the new sensor to shine (Competitive Plus mode with up to 22k FPS)
* The battery life improvement is huge (up to 52% less power consumption on higher polling rates and up to 90% on lower polling rates)
* Next-generation MotionSync reduces latency by 90% and improves output stability by 50% compared to previous versions
* The mouse comes without any skates applied, so it’s up to what skates you will use (there are dots and skates in the box)
* HyperClicks are very snappy and tactile, with a fast rebound
* Motion Sync is hardware-enabled here, with no software option to turn it off
* Some early reviewers reported sensor issues, but it’s all fixable with the latest firmware update
* The retail version will have no Sora logo on the left side, and the shell integrity will be improved

***There are a lot of wedge shapes lately: Lycan, G3 from Keychron, and now this. If your hand is smaller, try Lycan. If your hand is big, Sora v3 or G3 could be better for you.***

Ninjutso Sora V3 review after 2 months of use