Asking $500US plus shipping.

Wesco's MP1339 last runs slightly large, so recommended sizing down one half size from your properly measured Brannock size, or standard US sneaker size. If you have a wide foot, consider going true to size. Each boot also includes a leather footbed, which can be removed to provide more volume or to accomodate a different insole.

These boots are 8.5D which will roughly fit a 9 D brannock measurement.

Designed in collaboration with Wesco Boots, featuring their Mister Lou in Mahogany Horween Chromexcel leather.

Chromexcel is a hot-stuffed combination tanned leather that goes through a lengthy tanning process at Horween's facility in Chicago. The end product is a soft, supple, and flexible hide packed full of oils, which gives Chromexcel the excellent pullup that it is known for - when the leather is flexed or bent, the oils are displaced and beautiful tonal highs and lows become visible. CXL only gets better with age, and taking care of the leather is as simple as it gets. Frequent brushing will blend scuffs and bring wicked patina, while the inherent oils in the hide keep it from drying out quickly. 

Wesco's "Mister Lou" Engineer Boots are named after Mister Lou, one of Wesco's owner's dogs, who by all accounts was a very sweet pup. The Mister Lou is Wesco's modernized take on the classic American engineer boot, so the usual bulbous toebox and wide boot shaft have both had their volume reduced. The almond toe shape gives the Mister Lou a sleeker silhouette than more traditional engineer boots, but the classic silhouette has not been sacrificed - we have retained the height of the usual logger heel, and the lower profile toebox actually lends itself to a more vintage, less-moto boot style. Built upon Wesco's MP1339 last, these are finished with brass hardware, natural leather midsoles, Wesco SuperGrip half-soles and heels, vintage double and triple stitched uppers, and of course, traditional stitchdown construction that can be resoled as needed. 

Brooklyn x Wesco Mister Lou Engineer Boot  
Custom for Brooklyn Clothing Co.  
Horween Mahogany Chromexcel  
MP1339 last  
MP almond toe  
Plain toe  
10" boot shaft height  
Slim cut boot shaft  
Standard Boss heel height  
Natural leather midsoles  
Wesco brown SuperGrip outsoles  
Solid brass roller buckles  
Vintage triple stitched uppers  
Resoleable stitchdown construction  
Removable leather footbeds  
Handmade in Scapoose, OR, USA

Boots are 1-year old and have been worn with purpose.  They are beginning to show exceptional character.  There is rubber transfer from my motorcycle shifter on the left toe; this adds to the character but will fade out out with time and wear.

Wesco Mister Lou Engineer Boots in Mahogany CXL 8.5D