Hello, 

I apologise this is a long read I’m terrible at making something concise yet informative so I massively appreciate anyone who sticks around to help

I’ve recently acquired some old enterprise gear to upgrade my homelab with, now I’m aware this isn’t the best stuff and the power efficiency isn’t great but it was MEGA cheap (like sub £0.75 a TB cheap) so I’m rolling with it for now

I have a Dell MD1000 SAN disc array connected to a Dell H200e (LSI 9200-8e) SAS HBA (flashed to IT mode) using a SAS SFF 8470 to SAS 8088 cable connecting back to my Dell Precision T5810 running TrueNAS Community edition

The drives showed up in TrueNAS but all showed a capacity of 0B, I’m very new to “modern” enterprise gear, the last time I messed about with enterprise gear (stuff I still have) it was SCSI drives on a dual Pentium 3 Xeon server, so I did some digging and discovered the issue was likely 520 Byte sectors on the discs which are unusable to any OS and only useful for RAID controllers (which I don’t have as my card is flashed to IT no so I did some research and learnt how to use sg3\_utils to identify the sector size and perform a low level format to 512 Bytes so I can use the drives in TrueNAS

I have 15 of these drives identified as sg1 through 15

sg1-sg8 identified perfectly using the command 

sg\_readcap /dev/sg\* 

\* for each drive number

However when I got to sg9 the response from the terminal was sg\_readcap failed: Device not ready

The same was true of sg10 and sg11 so I continued with sg12 and sg13 (I’m unsure if I have the same problem with sg14 and sg15 as I haven’t tried yet) 

I’ve tried to research online what could cause this issue but everyone seems to have different symptoms and fixes that I’m convinced can’t be the solution

All the drives are identical, Seagate Constellation ST33000650SS drives 

I’ve tried to do a fair bit of research and I can’t find any answers, I could probably ask chatGPT or similar but I’m not really an AI fan so if I can help it I’d rather not, especially as the answers they give seem to be less than reliable

I’ve attached pictures of the setup and the terminal output (apologies it’s a picture of the screen I’m using a GParted live usb as I didn’t realise I could do this within TrueNAS) 

Once again if you’ve got that far and have some input that is massively appreciated ☺️

 

SAS Drives sg_readcap failed device not ready